KanexPro Support Assistant

Describe your setup, the part number, and what you are seeing.

Before we start

So the team can follow up if this needs a person.

Used only to follow up on this request. See our Privacy Policy.

General enquiry

Tell us what you need and the right person will come back to you.

Used only to answer you. See our Privacy Policy.

Support

Knowledge base

Setup, configuration and fault-finding for KanexPro products.

Product Guide: Dante Input Adapters (AUD-DTE-ECODE, LINEIN, XLRIN, HDMI, BT)
AUD-DTE-ECODE

Product Guide: Dante Input Adapters (AUD-DTE-ECODE, LINEIN, XLRIN, HDMI, BT)

AUD-DTE-ECODE · AUD-DTE-LINEIN · AUD-DTE-XLRIN · AUD-DTE-HDMI · AUD-DTE-BT KanexPro offers five Dante input adapters, each designed to bring a…

Dante Controller: Installation & Routing Guide
Audio

Dante Controller: Installation & Routing Guide

Setup Guide Dante Controller: Installation & Routing Guide Discover, configure, and route all Dante devices on your network Dante Controller is a…

White Paper: Modular vs. Fixed Matrix — Part 2: TCO Analysis, Deployment Scenarios & Conclusion
Flex Matrix

White Paper: Modular vs. Fixed Matrix — Part 2: TCO Analysis, Deployment Scenarios & Conclusion

White Paper — Part 2 of 2 Modular vs. Fixed Matrix Architecture TCO Analysis, Deployment Scenarios & Conclusion Continued from Part 1 : architecture…

Installation Guide: Chassis & Card Installation
Flex Matrix

Installation Guide: Chassis & Card Installation

Overview This guide covers rack mounting the FLEX chassis, installing input and output cards, and completing the initial cabling and power-on…

EasyAccomplish: Programming Keypads & Touch Panels
Controls

EasyAccomplish: Programming Keypads & Touch Panels

What is EasyAccomplish? EasyAccomplish is a third-party central control configuration software designed to make AV control programming simple and…

Features & Configuration: HDBaseT & CATx Extension
Flex Matrix

Features & Configuration: HDBaseT & CATx Extension

Overview The FLEX-CAT12OUT output card and FLEX-CATRX receiver extend 4K60 video from the FLEX chassis to displays up to 70 meters away over a single…

Features & Configuration: CEC Display Management
Flex Matrix

Features & Configuration: CEC Display Management

Overview Consumer Electronics Control (CEC) allows the FLEX Matrix to send power and input commands to connected HDMI displays without requiring a…

Application Notes: Sports Bar & Large Venue Deployment
Flex Matrix

Application Notes: Sports Bar & Large Venue Deployment

Overview The KanexPro FLEX Matrix is purpose-built for high-density display environments — sports bars, hospitality venues, command centers, and…

Product Guide: Huddle Room Switchers
Collaboration

Product Guide: Huddle Room Switchers

Overview KanexPro Huddle Room Switchers are compact BYOD presentation devices for small conference rooms. They accept USB-C and HDMI laptop inputs…

Troubleshooting: Common Dante Audio Issues
Audio

Troubleshooting: Common Dante Audio Issues

Not in Dante Controller: check the LINK LED and subnet. Silent: check subscription, sample rate, gain. Dropouts: raise latency, disable EEE, set QoS.

FAQ: AV over IP
AVO-IPCTL-JP2K

FAQ: AV over IP

JPEG2000, H.265 and SDVoE differ in network and latency; the AVO-IPCTL-JP2K takes 762 encoder and 762 decoder IDs and walls up to 9×9.

Product Guide: H.265 / HEVC
AV Over IP

Product Guide: H.265 / HEVC

The KanexPro H.265 range: AVO-IP265-4K for 4K60, separate 1080p60 encoders and decoders, and a KVM pair for operator control, over a 1G network.