4K60 H.265/H.264 HDMI Streaming Encoder — RTMP Push & RTSP
AVO-IP265-STREAM 4K60 H.265/H.264 HDMI streaming encoder: RTMP push, RTSP and TS multicast, 1080p second stream, audio-only stream, 802.3af PoE over 1G.
Streams a 4K60 HDMI source live to a streaming platform, the local network and a preview monitor at once, without a capture PC. The AVO-IP265-STREAM encodes the full 3840x2160 signal at up to 60Hz in H.265 or H.264, rather than taking 4K in and encoding only 1080p. It also runs a 1080p30 second stream and a 1280x720 JPEG preview stream at the same time. The compact 5.12 x 6.30 x 1.18 in metal unit draws 7.2W and runs on 802.3af PoE from the network switch, or on the included 12V locking adapter. It fits 1U or 6U V2 rack installations, so a full rack of streamers takes very little space. It is the right choice for lecture halls, houses of worship, town-hall rooms and IPTV venues where a true 4K60 encode and direct platform push matter more than a PC, capture card and software encoder at every source. Every stream uses a standard protocol: RTSP/UDP, RTSP/TCP, RTP/UDP, TS/UDP and RTMP, in unicast or multicast. That means VMS and recording systems, IPTV players, media players and live platforms can all receive it directly. A separate audio-only multicast stream feeds overflow and paging zones. The 3.5mm input embeds a mixer or microphone feed into the stream, and the 3.5mm output extracts program audio for local speakers. The HDMI loop output keeps the room display live while the unit encodes. Setup runs in an HTTP/HTTPS web GUI, and third-party control systems can manage the unit over Telnet, SSH or a TCP socket. 802.1X port authentication lets it join locked-down enterprise and
- 4K@60Hz H.264/H.265 (HEVC) Ultra HD encoder
- HDMI 2.0b input with 18Gbps video bandwidth, accepting up to 4K@60Hz 4:4:4
- Three simultaneous streams: 4K@60Hz H.264/H.265 main stream, 1080p@30 H.264 second stream and 1280x720@5 JPEG image stream
- RTSP/UDP, RTSP/TCP, RTP/UDP, TS/UDP and RTMP stream standards
- Main stream output up to 4K60Hz; second stream output up to 1080p30Hz
- Unicast and multicast streaming
- Audio-only multicast stream
- LPCM 2-channel audio at 48kHz
- Stream control (play/pause/stop) for each stream
- Adjustable bitrate (VBR/CBR), resolution, frame rate, GOP and EDID
Specifications| Encoding | H.265 / H.264 (main stream); H.264 (second stream); JPEG (image stream) |
|---|
| Video Bandwidth | 18Gbps |
|---|
| HDMI Compliance | HDMI 2.0b |
|---|
| Input Video Resolution | Up to 4K@60Hz 4:4:4 |
|---|
| Main Stream Resolution | Same as input, 3840x2160, 1920x1080, 1280x720, 640x480 |
|---|
| Second Stream Resolution | 1920x1080, 1280x720, 640x480 |
|---|
| Image Stream | 1280x720 JPEG at 5fps |
|---|
| Push Stream Frame Rate | 5–60Hz |
|---|
| Color Space | HDMI input: RGB, YCbCr 4:4:4 / 4:2:2 / 4:2:0; push stream encoding: 4:2:0 |
|---|
| Color Depth | HDMI input: 8/10/12-bit; push stream output: 8-bit |
|---|
| HDR | Not supported |
|---|
| Bitrate Control | VBR / CBR, adjustable bitrate |
|---|
| Second Stream H.264 Level | Baseline, Main, High |
|---|
| Stream Protocols | RTSP/UDP, RTSP/TCP, RTP/UDP, TS/UDP, RTMP |
|---|
| Transport | Unicast and multicast |
|---|
| Push Streams | Main and second stream RTMP push |
|---|
| Audio-Only Stream | Multicast, LPCM |
|---|
| Audio Format | LPCM 2CH, 48kHz |
|---|
| Audio Source | HDMI or analog (selectable) |
|---|
| Audio Latency | < 60ms |
|---|
| Output Impedance | 330 Ohms |
|---|
| Line Input/Output Level (Max.) | 2Vrms |
|---|
| Frequency Response | 20Hz–20kHz (+0.5dB / -1dB) |
|---|
| S/N Ratio | > 90dB @ 2Vrms, 1kHz, A-weighted |
|---|
| THD+N | < 0.05% @ 2Vrms, 1kHz |
|---|
| Inputs | 1 x HDMI IN (Type A, 19-pin female); 1 x AUDIO IN (3.5mm jack) |
|---|
| Outputs | 1 x HDMI OUT loop (Type A, 19-pin female); 1 x AUDIO OUT (3.5mm jack) |
|---|
| Network | 1 x LAN/PoE (RJ45, 802.3af PoE) |
|---|
| Network Video Bandwidth | 1G |
|---|
| Transmission Distance | 16 ft (5 m) over HDMI; 328 ft (100 m) over CAT6/6A/7 |
|---|
Questions
- What resolutions can the main and second streams be encoded at?
- The main stream can be H.265 or H.264 at the input's own resolution, 3840x2160, 1920x1080, 1280x720 or 640x480. The second stream is H.264 only, at 1920x1080, 1280x720 or 640x480, with Baseline, Main or High level. A third stream sends 1280x720 JPEG images at 5fps.
- What frame rate and bitrate settings are available?
- Push stream frame rates run from 5 to 60Hz. Each stream has VBR or CBR bitrate control, an adjustable bitrate in kbit, and a GOP setting for the interval between I-frames.
- How do I stream live to YouTube?
- Copy the RTMP live stream URL with your stream key from YouTube, for example rtmp://a.rtmp.youtube.com/live2/<your-stream-key>. Paste it into Main RTMP/RTMPS Push URL on the Encoder page and select Enable. Refresh the page; a green dot means the push is working.
- How do I play the RTSP or TS stream on a PC?
- On the Encoder page, turn on the RTSP or TS stream and click Copy beside its URL. In VLC, choose Media > Open Network Stream, paste the URL and click Play. Tools > Codec Information shows the stream settings and the current bitrate.
- How do I find the unit and open its web interface for the first time?
- Press the MENU button until the OLED screen shows the IP address page (the default address is 169.254.1.11). Set your PC to the same network segment, then type that address into Chrome to open the login page.
- Can it join a network that uses 802.1X port authentication or HTTPS-only management?
- Yes. On the Network page, turn 802.1x on and enter its username and password, then click Apply. The HTTPS switch on the same page moves the web GUI from HTTP to HTTPS, and the unit reboots when you change it.
- The stream shows no picture. What should I check?
- Check the VIDEO LED first: off means no signal, and flashing at 2Hz means the signal is unlocked. On the web GUI Status page, a red dot with No Signal under Input Status means no HDMI input, so check the source and the HDMI cable to IN. If the source still will not lock, try a different EDID on the
- I cannot reach the web interface.
- Press MENU to read the current IP address on the OLED screen, and check that your PC is on the same network segment. If HTTPS was turned on, open the address with https. As a last resort, hold MENU for 10 seconds to reset it to KanexPro default settings, which returns the unit to 169.254.1.11.
- Does it actually stream in 4K, or does it only accept a 4K input?
- It encodes and streams at 4K60. The main stream carries up to 3840x2160 at up to 60Hz in H.264 or H.265. At the same time, it runs a 1080p30 second stream and a 1280x720 JPEG preview stream, so one source can feed a high-resolution recorder, a lower-bandwidth audience and a monitoring view.
- Which platforms and players can receive the stream?
- It sends standard protocols: RTSP over UDP or TCP, RTP/UDP, TS/UDP and RTMP. Anything that accepts these can take it in, including streaming platforms that support RTMP push, video management and recording systems, IPTV players and standard media players. It also supports unicast and multicast for d