1×8 HDMI Splitter & Distribution Amplifier over CAT6 with PoC — 4K60 to 35m, 1080p to 60m/197ft
KanexPro SP-HDPOC1X8 1x8 HDMI splitter over CAT6: eight PoC receivers, 4K60 4:4:4 to 35m, 1080p to 60m/197ft, HDR, HDCP 2.2, audio extraction, IR, loop…
Splits one HDMI source to eight displays over single CAT6/6a/7 runs: up to 35m (115ft) at 4K60 4:4:4, 50m at 4K30 and 60m/197ft at 1080p60. The SP-HDPOC1X8 kit includes the transmitter and eight receivers. PoC powers every receiver from the transmitter over the same cable, so no power adapter is needed at any display. An HDMI loop output feeds a local monitor, and the compact transmitter mounts in shallow racks or hides behind equipment. Built for schools, retail chains, worship campuses, and hospitality venues that need more than four screens from a single source without the cost of enterprise HDBaseT. Supports HDMI 2.0 (18Gbps), HDCP 2.2, 3D, HDR10/HDR10+/HLG/Dolby Vision, and 7.1-channel lossless audio pass-through. Coaxial (LPCM and Dolby Digital up to 5.1) and 3.5mm analog (PCM 2.0) outputs de-embed audio for amplifiers or powered speakers. A rotary EDID dial on the transmitter sets one preset for mixed displays, and IR passes one way: a remote at any display controls the source at the transmitter. CE/FCC/UL certified with a 3-year warranty.
- HDMI 2.0, HDCP 2.2/1.x and DVI 1.0 compliant
- Support 18Gbps video bandwidth
- Support video resolution up to 4K2K@50/60Hz 4:4:4
- Support 3D, HDR, HDR10+, HLG and Dolby Vision
- Support up to 7.1CH HD audio pass-through
- Support digital and analog audio de-embedded output
- Extend the signal transmission distance up to 35 meters at the resolution of 4K2K@60Hz, 50 meters at 4K2K@30Hz, 60 meters at 1080P@60Hz via a single CAT6/6a/7 cable
- Support 1 HDMI input, 1 HDMI loop output and 8 CAT outputs
- One-way IR pass-through from receiver to transmitter (IR IN on each receiver, IR OUT on the transmitter): a remote at any display controls the source at the transmitter, not the other way round
- Advanced EDID management with rotary dial switch
Specifications| HDMI Compliance | HDMI 2.0 |
|---|
| HDCP Compliance | HDCP 2.2/1.x, DVI 1.0 |
|---|
| Video Bandwidth | 594 MHz / 18 Gbps |
|---|
| Video Resolution | Up to 4K2K@50/60Hz 4:4:4 |
|---|
| Color Depth | 8/10/12-bit |
|---|
| Color Space | RGB, YCbCr 4:4:4 / 4:2:2, YUV 4:2:0 |
|---|
| HDR Formats | 3D, HDR10, HDR10+, HLG, Dolby Vision |
|---|
| HDMI Audio | LPCM, Dolby Digital/Plus/EX, Dolby TrueHD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD MA, DSD |
|---|
| Coaxial Audio | LPCM 2.0/5.1, Dolby Digital 2/5.1CH |
|---|
| Analog Audio | PCM 2.0 |
|---|
| ESD Protection | ±8kV (air-gap) / ±4kV (contact) |
|---|
| Input | 1× HDMI Type A (19-pin female) |
|---|
| Output — HDMI | 1× HDMI Type A (Loop Out) |
|---|
| Output — CAT | 8× CAT OUT (RJ45, 8-pin female) |
|---|
| Audio — Coaxial | 1× Coaxial Audio OUT (RCA) |
|---|
| Audio — Analog | 1× L/R Audio OUT (3.5mm stereo mini-jack) |
|---|
| Control | 1× SERVICE (Micro-USB), 1× EDID Dial switch, 1× IR OUT (3.5mm) |
|---|
| Input | 1× CAT IN (RJ45) |
|---|
| Output | 1× HDMI Type A |
|---|
| Control | 1× IR IN (3.5mm), 1× SERVICE (Mini-USB), 1× DC 12V |
|---|
| 4K2K@60Hz | Up to 35m over CAT6/6a/7 |
|---|
| 4K2K@30Hz | Up to 50m over CAT6/6a/7 |
|---|
| 1080p@60Hz | Up to 60m / 197ft over CAT6/6a/7 |
|---|
| Housing | Metal Enclosure, Black |
|---|
| TX Dimensions | 300mm (W) × 100mm (D) × 28mm (H) |
|---|
| RX Dimensions | 88mm (W) × 61mm (D) × 18mm (H) |
|---|
| TX Weight | 823g |
|---|
| RX Weight | 155g |
|---|
| Power Supply | Input: AC 100–240V 50/60Hz, Output: DC 12V/2.5A |
|---|
| Power Consumption | 25.44W |
|---|
Questions
- What are the maximum extension distances?
- Up to 35m (115ft) at 4K2K@60Hz, up to 50m at 4K2K@30Hz, and up to 60m/197ft at 1080p@60Hz, each over a single CAT6/6a/7 cable run from the transmitter to a receiver.
- What audio formats does the unit support?
- HDMI audio pass-through covers LPCM, Dolby Digital/Plus/EX, Dolby TrueHD, DTS, DTS-EX, DTS-96/24, DTS High Resolution, DTS-HD Master Audio, and DSD. The de-embedded coaxial output supports LPCM 2.0/5.1 and Dolby Digital 2.0/5.1 channel, and the 3.5mm analog output carries PCM 2.0-channel stereo.
- Can firmware be updated in the field?
- Yes. Both the transmitter and each receiver expose a USB SERVICE port (transmitter: Micro-USB; receiver: Mini-USB) for firmware updates.
- Does IR control pass through between the transmitter and receivers?
- Yes, one-way. The transmitter has a 3.5mm IR OUT port and each receiver has a 3.5mm IR IN port, so a remote at the display end can control source equipment connected at the transmitter.
- How many outputs does the SP-HDPOC1X8 have?
- Eight. This is a compact 1x8 unit: one HDMI input, one HDMI loop-out on the transmitter, and eight CAT outputs, each feeding a receiver.
- What are the transmitter and receiver dimensions and weight?
- The transmitter measures approximately 11.81 x 3.94 x 1.10in (300 x 100 x 28mm) and weighs about 1.81lb (823g). Each receiver measures approximately 3.46 x 2.40 x 0.71in (88 x 61 x 18mm) and weighs about 0.34lb (155g).
- A receiver is not powering on. What should I check?
- Verify the CAT cable run to that receiver does not exceed 35m (115ft) at 4K60 or 60m/197ft at 1080p, and try a different CAT output port on the transmitter, since PoC delivers power to each receiver over the same cable as the video signal.
- There is no audio from the coaxial or analog output. What should I check?
- Confirm the source device is actually outputting audio over HDMI, and for Dolby or DTS surround formats select an EDID preset that includes 5.1-channel audio.
- Does the unit require configuration before use?
- No separate configuration is required for basic operation. Connect the HDMI source to the transmitter, run CAT cable to each of the eight receivers, connect displays, and power the transmitter; PoC powers all eight receivers automatically.
- What kind of installations is the SP-HDPOC1X8 designed for?
- It suits classrooms, retail signage, worship overflow, and residential multi-room setups needing up to eight displays where cable runs stay under 60m and a compact, low-configuration splitter is preferred over enterprise control features.