Name: 4K60 1×4 HDMI Distribution Amplifier over CAT6 — 60m/197ft
Brand: KanexPro
SKU: SP-HDPOC1X4

Question 1

What is the maximum video resolution and bandwidth supported?

Accepted Answer

Up to 4K2K@50/60Hz 4:4:4 with 594MHz/18Gbps video bandwidth. The unit is HDMI 2.0, HDCP 2.2/1.x, and DVI 1.0 compliant.

Question 2

What are the maximum extension distances?

Accepted Answer

Up to 35m (115ft) at 4K2K@60Hz, up to 50m at 4K2K@30Hz, and up to 60m/197ft at 1080p@60Hz, each over a single CAT6/6a/7 cable run from the transmitter to a receiver.

Question 3

How is EDID configured?

Accepted Answer

Per the product's control specification, EDID is set with a rotary dial switch on the transmitter, offering a range of resolution and audio-format presets to resolve handshake issues across mixed displays.

Question 4

Does IR control pass through between the transmitter and receivers?

Accepted Answer

Yes, one-way. The transmitter has a 3.5mm IR OUT port and each receiver has a 3.5mm IR IN port, so a remote at the display end can control source equipment connected at the transmitter.

Question 5

How many outputs does the SP-HDPOC1X4 have?

Accepted Answer

Four. This is a compact 1x4 unit: one HDMI input, one HDMI loop-out on the transmitter, and four CAT outputs, each feeding a receiver.

Question 6

What are the unit dimensions and weight?

Accepted Answer

Product documentation for this SKU currently lists two different transmitter enclosure sizes (a compact half-rack figure and a full-size figure that matches an unrelated larger splitter). Confirm the physical footprint against the unit in hand before finalizing a rack or furniture cutout. Each recei

Question 7

There is no video on one or more displays. What should I check?

Accepted Answer

Confirm CAT6/6a/7 STP cable (solid-core, not CCA) is used on the affected run, check the connection indicator LEDs on both the transmitter and the receiver, and if displays use mixed native resolutions, set the EDID rotary dial to the lowest common resolution across all connected displays.

Question 8

There is no audio from the coaxial or analog output. What should I check?

Accepted Answer

Confirm the source device is actually outputting audio over HDMI, and for Dolby or DTS surround formats select an EDID preset that includes 5.1-channel audio.

Question 9

What kind of installations is the SP-HDPOC1X4 designed for?

Accepted Answer

It suits classrooms, retail signage, worship overflow, and residential multi-room setups where cable runs stay under 60m and a compact, low-configuration splitter is preferred over enterprise control features.

Question 10

Does the unit require configuration before use?

Accepted Answer

No separate configuration is required for basic operation. Connect the HDMI source to the transmitter, run CAT cable to each receiver, connect displays, and power the transmitter; PoC powers all four receivers automatically.