# KanexPro > KanexPro designs and sells professional audio-visual connectivity: HDMI and USB-C extenders, matrix switchers, splitters, scalers, KVM and AV-over-IP. This site is the catalogue and the documentation; ordering is at the stores below. Specifications here are the manufacturer's own. Every product page carries its specification table as schema.org PropertyValue data and a plain summary in the HTML, so neither needs JavaScript to read. ## Where to buy - [KanexPro Store](https://store.kanexpro.com/): retail, open to anyone. - [KanexPro trade store](https://b2b.kanexpro.com/): dealers and integrators, ordering by approved account. ## Categories - [Amplifiers, Dante Audio, Decoders & Extractors](https://kanexpro.com/audio): Amplify, network and extract audio: 70V/100V Class D amps to 150W, Dante line/XLR/USB adapters, 8K eARC decoders, and ARC extenders reaching 150m over CAT. - [AV over IP Encoders, Decoders & Controllers](https://kanexpro.com/av-over-ip): Route 4K60 4:4:4 video over IP with JPEG2000, H.265 or SDVoE encoders, decoders and transceivers. Dante-ready, PoE, KVM and BYOD wall plates on one network. - [8K Active Optical Cables - Fiber HDMI, DP & USB-C](https://kanexpro.com/cables): Run 8K HDMI 2.1 and DisplayPort 2.0 active optical cable to 90m, plus USB-C 3.2 Gen2 to 15m. Fiber cores carry full bandwidth over long pulls with zero loss. - [Huddle, Presentation & Video Wall Switching](https://kanexpro.com/collaboration): Switch, route and scale 4K60 USB-C, HDMI and HDBaseT 3.0 signals across huddle rooms and video walls, with 4x4 seamless matrix, KVM and 70m extension. - [AV Control Processors, Keypads & Touch Panels](https://kanexpro.com/controls): Control AV rooms over IP with PoE processors, 4" and 6" touch panels, 8- and 10-button keypads, and expanders for serial, IR, relay and digital I/O. - [HDMI, USB & USB-C Extenders over Cat6/HDBaseT](https://kanexpro.com/extenders): Extend 4K60, 8K48Gbps and USB-C signals over Cat5e/6 up to 150m/492ft via HDBaseT, AV over IP or wall plates, with eARC, KVM, PoC and 100W PD. - [4K60 Modular Matrix Switchers & Cards](https://kanexpro.com/flex-matrix): Route up to 24x60 4K60 sources with hot-swap HDMI and CATx input/output cards, built-in video wall and independent scaling, plus HDBaseT receivers. - [HDMI & HDBaseT Matrix Switchers](https://kanexpro.com/matrix): Route 4K60 18Gbps HDMI across 4x2 to 16x16 matrix switchers, with HDBaseT models extending CAT to 150m, ARC, audio extraction and RS-232 control. - [8K HDMI 2.1 Splitters & Matrix Distribution](https://kanexpro.com/splitters): Split one HDMI source to 2, 4 or 8 displays at 8K60 over HDMI 2.1 and 48Gbps, or send 4K60 to 150m/492ft over CAT6 with EDID and audio de-embedding. - [8K & 4K HDMI Switchers, KVM & Scalers](https://kanexpro.com/switchers): Switch 2x1 to 9x2 sources over HDMI 2.1 at 8K60 or 4K120, HDCP 2.3. Scale, tile MultiView, de-embed audio, and add KVM or HDBaseT extension. ## Products (183 current) - [AUD-AMP-8K — 8K HDMI 2.1 eARC Audio to Amplifier Adapter](https://kanexpro.com/item/AUD-AMP-8K): KanexPro AUD-AMP-8K sends ARC/eARC audio from an 8K HDMI 2.1 TV or source to an older AV receiver over HDMI. Dolby Atmos, DTS:X, VRR, ALLM pass-through. - [AUD-DCODE-ANA — Digital to Analog Audio Decoder with Dolby Digital & DTS – Optical/Coaxial to RCA & 3.5mm](https://kanexpro.com/item/AUD-DCODE-ANA): AUD-DCODE-ANA decodes Dolby Digital, DTS and PCM from optical or coaxial to stereo RCA and 3.5mm headphone out. 192kHz PCM, 24-bit DSP, 5V plug-and-play. - [AUD-DCODEARC-4K — HDMI ARC Audio Decoder with Dolby & DTS Downmix](https://kanexpro.com/item/AUD-DCODEARC-4K): KanexPro AUD-DCODEARC-4K HDMI ARC to analog converter: decodes Dolby 5.1, DTS 5.1 or PCM 2.0 from a TV to stereo RCA and 3.5mm. USB-powered, CEC volume. - [AUD-DCODEHDMI-4K — 4K HDMI Audio Decoder & Down Mixer with Dolby/DTS](https://kanexpro.com/item/AUD-DCODEHDMI-4K): KanexPro AUD-DCODEHDMI-4K 4K HDMI audio decoder extracts and down-mixes Dolby/DTS bitstream to analog stereo. 18Gbps, 4K60 4:4:4 HDR pass-through, optical S/PDIF, RCA L/R output. - [AUD-DEBED-8K — 8K HDMI Audio De-Embedder with ARC](https://kanexpro.com/item/AUD-DEBED-8K): AUD-DEBED-8K HDMI 2.1 audio de-embedder: passes 8K@60Hz/4K@120Hz video and sends source or TV ARC audio to S/PDIF optical (up to 5.1) and L/R analog stereo. - [AUD-DEBEDEARC-4K — 4K60 HDMI eARC/ARC Audio Extractor with HDR Pass-Through and Dedicated HDMI Audio Output](https://kanexpro.com/item/AUD-DEBEDEARC-4K): KanexPro AUD-DEBEDEARC-4K extracts TV eARC/ARC audio (Dolby Atmos, DTS:X, 7.1) to an AV receiver over HDMI, with 4K60 4:4:4 HDR and Dolby Vision pass-through. - [AUD-DTE-2CHAMP — 150W Class D Dante® Amplifier with 6-Output Audio Matrix and DSP](https://kanexpro.com/item/AUD-DTE-2CHAMP): KanexPro AUD-DTE-2CHAMP 150W Class D Dante amplifier: 2x75W at 4/8 ohm or 150W at 70V/100V, 6-output audio matrix, two mixers and 8-band parametric EQ. - [AUD-DTE-30AMP — 30W 2-Channel Class D Amplifier with Dante](https://kanexpro.com/item/AUD-DTE-30AMP): AUD-DTE-30AMP 30W 2-channel Class D Dante/AES67 amplifier: 2x 15W or 30W mono at 4/8 ohm, PoE+ or 24V power, 48V mic input, DSP, RS-232 and RelayAV control. - [AUD-DTE-70AMP — 70W 2-Channel Class D Amplifier with Dante](https://kanexpro.com/item/AUD-DTE-70AMP): AUD-DTE-70AMP 70W 2-channel Class D Dante amplifier: 2 × 35W at 4/8 ohm, PoE++ Class 8, Dante/AES67 2×2, mic/line input with 48V phantom and 8-band PEQ DSP. - [AUD-DTE-ARC — HDMI ARC to Dante Adapter, 2 Channel, PoE](https://kanexpro.com/item/AUD-DTE-ARC): AUD-DTE-ARC HDMI ARC to Dante adapter: puts a display's 2-channel ARC audio onto Dante/AES67 over one PoE drop. 32–192kHz input, 1/2/5ms latency, USB-C power. - [AUD-DTE-BT — Dante® Bluetooth Audio Input Adapter with APTX-LL & APTX-HD](https://kanexpro.com/item/AUD-DTE-BT): KanexPro AUD-DTE-BT bridges Bluetooth 5.0 audio directly onto any Dante network — 2-channel PoE-powered endpoint, no analog conversion required. Ideal for BYOD audio in commercial AV. (156 chars) - [AUD-DTE-DCODE — Dante enabled 2-Channel Analog Audio Decoder with POE](https://kanexpro.com/item/AUD-DTE-DCODE): KanexPro AUD-DTE-DCODE Dante® 2CH analog audio decoder. Phoenix connector balanced/unbalanced output, 3-level gain switch, PoE or DC 12V power, metal enclosure. - [AUD-DTE-ECODE — Dante Powered 2-Channel Line In Audio Input Encoder with POE](https://kanexpro.com/item/AUD-DTE-ECODE): KanexPro AUD-DTE-ECODE converts 2-channel balanced/unbalanced analog audio to Dante® via 6-pin Phoenix input, with 3-level gain and PoE or DC 12V power. - [AUD-DTE-HDMI — HDMI to Dante® 2CH Network Audio Encoder](https://kanexpro.com/item/AUD-DTE-HDMI): KanexPro AUD-DTE-HDMI de-embeds PCM 2CH audio from HDMI 2.0b straight onto a Dante/AES67 network. No analog stage, PoE or USB-C power, 1/2/5ms latency. - [AUD-DTE-LINEIN — Dante 2CH Analog Line Input Adapter](https://kanexpro.com/item/AUD-DTE-LINEIN): KanexPro AUD-DTE-LINEIN converts 2-channel balanced/unbalanced analog audio to Dante digital audio with 5-level sensitivity, PoE/USB-C power. AES67 compatible. - [AUD-DTE-LINEOUT — Dante® 2-Channel Line Output Adapter](https://kanexpro.com/item/AUD-DTE-LINEOUT): KanexPro AUD-DTE-LINEOUT converts Dante 2CH digital audio to balanced/unbalanced analog output. 5-level gain, PoE/USB-C powered, Ultimo 2x2, 96kHz/24bit, >100dB S/N. - [AUD-DTE-USB — Dante® 2-Channel USB Audio Interface](https://kanexpro.com/item/AUD-DTE-USB): KanexPro AUD-DTE-USB bidirectional USB-to-Dante® encoder/decoder. No-driver USB Audio Class 1.0, 2CH I/O, AES67, PoE or USB power, metal enclosure. - [AUD-DTE-USBC — Dante® 2-Channel USB-C I/O Adapter](https://kanexpro.com/item/AUD-DTE-USBC): KanexPro AUD-DTE-USBC bridges USB-C devices to Dante® networks with 2-channel bidirectional audio, 192kHz/24-bit output, AES67, and PoE power — no drivers required. - [AUD-DTE-WPBT — Bluetooth to Dante Wall Plate, 1-Gang US, PoE](https://kanexpro.com/item/AUD-DTE-WPBT): AUD-DTE-WPBT Bluetooth to Dante wall plate, US 1-gang, PoE. Bluetooth 5.1 aptX HD/AAC, two devices, AES67, TCP/IP and web control for commercial AV rooms. - [AUD-DTE-WPXLR — 2x2 XLR and Dante Wall Plate, 2-Gang US, PoE](https://kanexpro.com/item/AUD-DTE-WPXLR): AUD-DTE-WPXLR 2x2 XLR Dante® wall plate: two mic/line inputs with 48V phantom, two line outputs, AES67, up to 96kHz, PoE Class 1, US 2-gang Decora design. - [AUD-DTE-XLRIN — Dante® 2-Channel XLR Input Adapter](https://kanexpro.com/item/AUD-DTE-XLRIN): KanexPro AUD-DTE-XLRIN converts 2-channel XLR analog audio to Dante® with 5-level gain, AES67 support, and PoE or USB-C power in a compact form factor. - [AUD-DTE-XLROUT — Dante® 2-Channel XLR Output Adapter](https://kanexpro.com/item/AUD-DTE-XLROUT): KanexPro AUD-DTE-XLROUT converts Dante® 2CH digital audio to balanced XLR output with 5-level gain, AES67 support, and PoE or USB-C power in a compact form factor. - [AUD-EXT-ARC150M — HDMI ARC & Optical Audio Extender over CAT5e/6/7 – 150m/492ft TX/RX Kit](https://kanexpro.com/item/AUD-EXT-ARC150M): AUD-EXT-ARC150M extends HDMI ARC or optical S/PDIF audio up to 150m/492ft over one CAT5e/6/7 cable (90m at 192kHz), with CEC pass-through and Dolby/DTS 5.1. - [AUD-EXT-EARC100M — HDMI eARC/ARC and S/PDIF Audio over CAT Extender 100m with Bi-directional PoC](https://kanexpro.com/item/AUD-EXT-EARC100M): KanexPro AUD-EXT-EARC100M extends HDMI eARC/ARC or S/PDIF audio 100m over one CAT cable to a soundbar or AVR, with Dolby Atmos, CEC and bi-directional PoC. - [AUD-SBAR-8K — 8K HDMI 2.1 eARC Audio to Soundbar Adapter](https://kanexpro.com/item/AUD-SBAR-8K): KanexPro AUD-SBAR-8K de-embeds eARC audio from 8K HDMI 2.1 TVs to any soundbar including SONOS ARC and Beam. Zero latency, Dolby Atmos, DTS:X, VRR, ALLM. - [AUD2ACV — Digital Optical (TOSLINK) & Coaxial S/PDIF to Analog RCA Stereo Audio Decoder Down Mixer](https://kanexpro.com/item/AUD2ACV): Convert digital optical (TOSLINK) or coaxial S/PDIF audio to analog stereo RCA R/L with the KanexPro AUD2ACV. 48kHz, 2-channel PCM, power supply included. - [AVO-IP265-4K — 4K60 H.265/H.264 AV over IP Transceiver — Switchable ENC/DEC](https://kanexpro.com/item/AVO-IP265-4K): KanexPro AVO-IP265-4K 4K60 H.265/H.264 AV over IP switchable transceiver, encoder or decoder mode, copper & fiber SFP, 36-stream multiview, KVM seat roaming, text overlay, seamless switching over 1G. - [AVO-IP265HD-DEC — 1080P60 H.265 AV over IP Decoder](https://kanexpro.com/item/AVO-IP265HD-DEC): AVO-IP265HD-DEC 1080p60 H.265 AV over IP decoder: PoE, multicast, distributed matrix and video wall to 9×9 with RS-232 control over a standard 1G network. - [AVO-IP265HD-ENC — 1080P60 H.265 AV over IP Encoder](https://kanexpro.com/item/AVO-IP265HD-ENC): AVO-IP265HD-ENC 1080p60 H.265 AV over IP encoder distributes one HDMI source to unlimited displays — matrix, multicast and video wall up to 9×9 over 1G with PoE. - [AVO-IP265HDK-DEC — 1080P60 H.265 AV over IP KVM Decoder](https://kanexpro.com/item/AVO-IP265HDK-DEC): AVO-IP265HDK-DEC 1080p60 H.265 AV over IP KVM decoder: add controllable displays with USB-KVM, bidirectional IR and RS-232, matrix and 9x9 video wall over 1G. - [AVO-IP265HDK-ENC — 1080P60 H.265 AV over IP KVM Encoder](https://kanexpro.com/item/AVO-IP265HDK-ENC): AVO-IP265HDK-ENC 1080p60 H.265 AV over IP KVM encoder distributes one HDMI source to unlimited displays over 1G, with USB-KVM, bidirectional IR, RS-232 and PoE. - [AVO-IPCTL-265 — 1G H.265 AV over IP System Controller](https://kanexpro.com/item/AVO-IPCTL-265): KanexPro AVO-IPCTL-265 1G H.265 AV over IP system controller — matrix switching, video wall with window roaming, mouse collaboration, seamless switching, IP camera import, dual 1G network isolation. - [AVO-IPCTL-265HD — H.265 AV over IP System Controller — 100M](https://kanexpro.com/item/AVO-IPCTL-265HD): KanexPro AVO-IPCTL-265HD 100M H.265 AV over IP system controller — matrix switching, video wall, dual 100M network isolation, web GUI, GPIO control. Cost-effective H.265 system management. - [AVO-IPCTL-JP2K — 4K60 JPEG2000 AV over IP System Controller](https://kanexpro.com/item/AVO-IPCTL-JP2K): KanexPro AVO-IPCTL-JP2K JPEG2000 AV over IP system controller — drag-and-drop matrix switching, 9×9 video wall, KVM roaming, Dante management, dual-network isolation over 1G. - [AVO-IPCTL-SDV — 4K60 SDVoE AV over IP System Controller](https://kanexpro.com/item/AVO-IPCTL-SDV): KanexPro AVO-IPCTL-SDV SDVoE AV over IP system controller — zero-frame latency matrix switching, 9×9 video wall, USB KVM, dual-network isolation, web GUI. Works with AVO-IPSDV-4K SDVoE endpoints. - [AVO-IPJP2K-DEC — 4K60 4:4:4 JPEG2000 AV over IP Decoder — Copper + Fiber In One Box](https://kanexpro.com/item/AVO-IPJP2K-DEC): AVO-IPJP2K-DEC 4K60 4:4:4 JPEG2000 AV-over-IP decoder: matrix, 9x9 video wall and KVM over standard 1G. Copper plus fiber in one box, Dante AV-A, PoE-powered. - [AVO-IPJP2K-ENC — 4K60 4:4:4 JPEG2000 AV over IP Encoder — Dante Ready with Contact Control](https://kanexpro.com/item/AVO-IPJP2K-ENC): AVO-IPJP2K-ENC: 4K60 4:4:4 JPEG2000 AV over IP encoder on standard 1G copper plus SFP fiber, optional pre-licensed Dante, USB/KVM, 9x9 video wall and PoE. - [AVO-IPJP2KD-DEC — 4K60 JPEG2000 AV over IP Decoder — Dante Dual LAN with Endpoint Control](https://kanexpro.com/item/AVO-IPJP2KD-DEC): AVO-IPJP2KD-DEC: 4K60 4:4:4 JPEG2000 AV over IP decoder with dual copper LAN isolating Dante AV-A audio, PoE power, USB KVM, IR, RS-232 and 9x9 video wall. - [AVO-IPJP2KD-ENC — 4K60 4:4:4 JPEG2000 AV over IP Encoder — Dante Dual LAN with Contact Control](https://kanexpro.com/item/AVO-IPJP2KD-ENC): AVO-IPJP2KD-ENC: 4K60 4:4:4 JPEG2000 AV over IP encoder with dual-LAN Dante, 2 relay + 2 digital I/O contact control, 9x9 video wall and KVM over 1G PoE. - [AVO-IPJP2KS-DEC — 4K60 4:4:4 JPEG2000 AV over IP Decoder](https://kanexpro.com/item/AVO-IPJP2KS-DEC): AVO-IPJP2KS-DEC decoder terminates visually lossless 4K60 4:4:4 to any display over standard 1G — PoE, IR/RS-232/CEC over IP, up to 9x9 video wall, Dante-ready. - [AVO-IPJP2KS-ENC — 4K60 4:4:4 JPEG2000 AV over IP Encoder — Slim PoE, Dante Ready](https://kanexpro.com/item/AVO-IPJP2KS-ENC): AVO-IPJP2KS-ENC: slim 4K60 4:4:4 JPEG2000 AV over IP encoder. PoE, HDMI 2.0b 18Gbps, HDR, 9x9 video wall, Dante ready over the 1G switch you already have. - [AVO-IPJP2KUC-ENC — 4K60 JPEG2000 AV over IP BYOD Encoder — USB-C & HDMI](https://kanexpro.com/item/AVO-IPJP2KUC-ENC): KanexPro AVO-IPJP2KUC-ENC 4K60 JPEG2000 BYOD AV over IP encoder with HDMI + USB-C dual input, PD 100W laptop charging, Dolby Vision, Dolby Atmos, ARC/eARC & Dante Ready over 1G. - [AVO-IPJP2KWPM — 4K60 JPEG2000 AV over IP BYOD Wall Plate Encoder — HDMI & USB-C](https://kanexpro.com/item/AVO-IPJP2KWPM): KanexPro AVO-IPJP2KWPM 4K60 JPEG2000 BYOD AV over IP wall plate encoder, US 2-gang, HDMI + USB-C dual input, USB-C laptop charging, Dante Ready over 1G. - [AVO-IPSDV-4K — 4K60 SDVoE AV over IP Transceiver — Switchable ENC/DEC](https://kanexpro.com/item/AVO-IPSDV-4K): KanexPro AVO-IPSDV-4K 4K60 SDVoE AV over IP transceiver, switchable encoder/decoder, zero-frame latency, uncompressed 4:4:4, Dolby Atmos, DTS:X, copper & fiber 10G, USB KVM, 9x9 video wall. - [CBL-AOCDP8K-30M — 8K DisplayPort 2.0 Active Optical Cable - 30M](https://kanexpro.com/item/CBL-AOCDP8K-30M): KanexPro CBL-AOCDP8K-30M — DP 2.0 UHBR10 active optical cable, 40Gbps, 8K@60Hz, 30 meters (98 ft.). Plug-and-play, no external power, 3-year warranty. - [CBL-AOCDP8K-60M — 8K DisplayPort 2.0 Active Optical Cable - 60M](https://kanexpro.com/item/CBL-AOCDP8K-60M): KanexPro CBL-AOCDP8K-60M — DP 2.0 UHBR10 active optical cable, 40Gbps, 8K@60Hz, 60 meters (197 ft.). Plug-and-play, no external power, 3-year warranty. - [CBL-AOCDP8K-90M — 8K DisplayPort 2.0 Active Optical Cable - 90M](https://kanexpro.com/item/CBL-AOCDP8K-90M): KanexPro CBL-AOCDP8K-90M — DP 2.0 UHBR10 active optical cable, 40Gbps, 8K@60Hz, 90 meters (295 ft.). Plug-and-play, no external power, 3-year warranty. - [CBL-AOCHDMI8K-30M — 8K HDMI 2.1 Active Optical Fiber Cable - 30M (98 ft.) | 48Gbps](https://kanexpro.com/item/CBL-AOCHDMI8K-30M): KanexPro CBL-AOCHDMI8K-30M — HDMI 2.1 active optical cable, 48Gbps, 8K@60Hz, eARC, 30 meters (98 ft.). Plug-and-play, no external power, 3-year warranty. - [CBL-AOCHDMI8K-60M — 8K HDMI 2.1 Active Optical Cable - 60M (197 ft.)](https://kanexpro.com/item/CBL-AOCHDMI8K-60M): KanexPro CBL-AOCHDMI8K-60M — HDMI 2.1 active optical cable, 48Gbps, 8K@60Hz, eARC, 60 meters (197 ft.). Plug-and-play, no external power, 3-year warranty. - [CBL-AOCHDMI8K-90M — 8K HDMI 2.1 Active Optical Fiber Cable (AOC) - 90M (295 ft.)](https://kanexpro.com/item/CBL-AOCHDMI8K-90M): KanexPro CBL-AOCHDMI8K-90M 8K HDMI 2.1 fiber optic cable (AOC), 90m (295 ft.): 48Gbps, 8K@60Hz, 4K@120Hz, eARC, HDCP 2.2. Bus-powered, no external supply. - [CBL-AOCUSBC-05M — Adaptive USB-C 3.2 Gen2 Active Optical Cable (AOC), DisplayPort 2.1, PD 60W - 5M (16 ft.)](https://kanexpro.com/item/CBL-AOCUSBC-05M): KanexPro CBL-AOCUSBC-05M 5m (16 ft.) USB-C active optical cable: DP 2.1 8K@60Hz + USB 2.0, or DP 1.4 4K@60Hz + USB 3.2 10Gbps data, with PD 60W charging. - [CBL-AOCUSBC-10M — Adaptive USB-C 3.2 Gen2 Active Optical Cable - 10M (33 ft.)](https://kanexpro.com/item/CBL-AOCUSBC-10M): KanexPro CBL-AOCUSBC-10M 10m (33 ft.) adaptive USB-C active optical cable: DP 2.1 8K60 + USB 2.0 or DP 1.4 4K60 + USB 3.2 10Gbps, PD 60W. Plug and play. - [CBL-AOCUSBC-15M — Adaptive USB-C 3.2 Gen2 Active Optical Cable - 15M](https://kanexpro.com/item/CBL-AOCUSBC-15M): KanexPro CBL-AOCUSBC-15M — full-featured USB-C 3.2 Gen2 AOC, adaptive DP 2.1/USB 3.2 10Gbps, PD 60W, 15 meters (49 ft.). Plug-and-play, no firmware, 3-year warranty. - [COL-HUD-21 — 2×1 HDMI & USB-C Huddle Room Switcher with USB 3.2 KVM](https://kanexpro.com/item/COL-HUD-21): KanexPro COL-HUD-21 — 2×1 USB-C & HDMI huddle room switcher with 100W PD charging, USB 3.2 KVM, balanced audio I/O, dual 1G Ethernet 802.1x, 4K60 4:4:4. - [COL-HUD-21D — 2×1 Dual USB-C Huddle Room Switcher with USB 3.2 KVM](https://kanexpro.com/item/COL-HUD-21D): KanexPro COL-HUD-21D — 2×1 dual USB-C huddle room switcher. Both inputs: 4K60 4:4:4, USB 3.2 KVM, 50W+50W PD charging, dual 1G Ethernet 802.1x, balanced audio. - [COL-HUD-42 — 4×2 HDMI & USB-C Huddle Room Matrix Switcher](https://kanexpro.com/item/COL-HUD-42): KanexPro COL-HUD-42 — 4×2 huddle room matrix switcher. 4 inputs (2× USB-C + 2× HDMI), 2 independent HDMI outputs, 100W PD, USB 3.2 KVM, dual 1G Ethernet 802.1x, 4K60. - [CON-AV-HD4K — Composite/ S-video to 4K HDMI® Converter](https://kanexpro.com/item/CON-AV-HD4K): Convert Legacy Composite AV or S-Video signals to 4K UHD - [CON-GAMECAP — HDMI 4K/30Hz to USB 2.0 Gaming & Streaming Capture Dongle w/ 3ft HDMI Cable](https://kanexpro.com/item/CON-GAMECAP): KanexPro CON-GAMECAP HDMI to USB 2.0 capture dongle: record or stream consoles, PCs and cameras in up to 4K/30Hz with OBS or VLC. UVC, bus powered. - [CON-GAMECAPL — HDMI to USB 4K30 Game Capture Box with HDMI Loop Out | Stream & Record Consoles to Your PC](https://kanexpro.com/item/CON-GAMECAPL): HDMI to USB game capture box with HDMI loop out: play on your TV while you stream or record 4K30 HDMI to a Windows or macOS computer in OBS or VLC. - [CON-VGA-HD4K — VGA to 4K HDMI® Converter](https://kanexpro.com/item/CON-VGA-HD4K): Scale & Convert Analog Computer Video signals to 4K UHD - [CR-3XCONTROL — IP-Based IR, RS-232 and Relay Controller with PoE](https://kanexpro.com/item/CR-3XCONTROL): KanexPro CR-3XCONTROL PoE IP controller: 4 IR outputs with learning, 4 relays, RS-232/422/485 and 8 trigger inputs; 32 macros via WebGUI or Telnet. - [CR-EXPAND1 — PoE Control Expander with Serial, IR, Relay & Digital I/O](https://kanexpro.com/item/CR-EXPAND1): KanexPro CR-EXPAND1 PoE control expander: RS-232/RS-485, IR, two relays and digital I/O over one Ethernet cable, with a web GUI and open TCP/UDP API. - [CR-EXPAND4 — 4-Port AV Control Expander — Serial, Relay & Ethernet](https://kanexpro.com/item/CR-EXPAND4): KanexPro CR-EXPAND4 4-port AV control expander with RS-232/RS-485/RS-422, 4 relay outputs, and Ethernet for remote multi-device serial and relay control. - [CR-HOST6S — Compact AV Control Processor with 6-Port Serial, Relay & Dual Gigabit PoE](https://kanexpro.com/item/CR-HOST6S): KanexPro CR-HOST6S compact AV control processor with 6 serial ports, dual Gigabit PoE, relay, IR, and web GUI for programmable room automation and AV control. - [CR-HOST8R — 1U AV Control System with 8 Serial, 8 Relay, 8 IR/Serial & 8 Digital I/O](https://kanexpro.com/item/CR-HOST8R): KanexPro CR-HOST8R 1U rack-mount AV control processor with 8 serial, 8 IR/serial, 8 relay, 8 digital I/O, and Gigabit Ethernet for enterprise room automation. - [CR-KEY10R — 10-Button Programmable Wall Keypad with RS232, IR, Relay & PoE](https://kanexpro.com/item/CR-KEY10R): KanexPro CR-KEY10R 10-button programmable wall keypad with RS232, RS485, IR, relay, PoE & knob. Standalone Linux AV controller — no processor required. - [CR-KEY8U — 8-Button Programmable Wall Keypad with RS232, IR, Relay & PoE](https://kanexpro.com/item/CR-KEY8U): KanexPro CR-KEY8U 8-button programmable wall keypad with RS232, RS485, IR, relay & PoE. Standalone Linux AV controller in US 1-Gang — no processor required. - [CR-TOUCH4A — 4" Capacitive Touchscreen AV Control Panel with PoE & Android 11](https://kanexpro.com/item/CR-TOUCH4A): KanexPro CR-TOUCH4A 4-inch capacitive touchscreen AV control panel with Android 11, PoE, RS232 & Gigabit Ethernet. Programmable wall-mount room controller. - [CR-TOUCH6R — 6" Widescreen Touch Panel with Knob, RS232/RS485 & PoE](https://kanexpro.com/item/CR-TOUCH6R): KanexPro CR-TOUCH6R 6-inch widescreen touch panel with knob, Android 11, RS232, RS485, PoE. Programmable AV room controller with optional Wi-Fi/Bluetooth. - [EXT-4KHD150M2 — Long-Range 4K HDMI over HDBaseT Extender Kit — 4K60 to 120m, 1080p to 150m](https://kanexpro.com/item/EXT-4KHD150M2): KanexPro EXT-4KHD150M2 HDBaseT kit extends HDMI over one Cat5e/6: 4K60 4:4:4 to 120m, 1080p to 150m, with RS-232, bi-directional IR, audio de-embed and PoC. - [EXT-4KHD70M — 4K60Hz HDR HDMI Extender over Cat6 with Loop-Out, IR & ARC - 70M (230 ft.)](https://kanexpro.com/item/EXT-4KHD70M): KanexPro EXT-4KHD70M HDMI extender TX+RX kit — 4K@60Hz HDR over single Cat6 to 70M. Zero latency, HDCP 2.2, bi-directional IR, ARC S/PDIF, 3-year warranty. - [EXT-50M18G — 4K60Hz 18Gbps HDMI Extender over Cat5e/6 - 50M](https://kanexpro.com/item/EXT-50M18G): KanexPro EXT-50M18G — ultra-slim 4K@60Hz 18Gbps HDMI extender over Cat5e/6 to 50M. HDMI loop-out, one-way IR, PoC from one 12V adapter, HDR, 3-year limited warranty. - [EXT-AVIP120M — NetworkAV™ HDMI over IP Encoder/Decoder Kit — 120M 1080p](https://kanexpro.com/item/EXT-AVIP120M): KanexPro EXT-AVIP120M HDMI over IP encoder/decoder kit — extend 1080p up to 120m over CAT5e/6 with MJPEG compression, IR control, and TCP/IP support. - [EXT-AVIP120MRX — NetworkAV™ 1080p HDMI over IP Receiver — 120M Add-On](https://kanexpro.com/item/EXT-AVIP120MRX): KanexPro EXT-AVIP120MRX standalone HDMI over IP decoder — add display endpoints to any NetworkAV 120M system up to 394 ft over CAT5e/6 with IR control. - [EXT-HD4KEARC-50M — 4K HDMI Extender (50m) with eARC & S/PDIF Audio Return](https://kanexpro.com/item/EXT-HD4KEARC-50M): KanexPro EXT-HD4KEARC-50M HDMI extender: 4K60 video to the TV and eARC or S/PDIF audio back to the AVR over one CAT6/6a cable up to 50m/164ft, with IR. - [EXT-HD4KEARC-70M — 4K HDMI/eARC over HDBaseT 3.0 Extender (70m)](https://kanexpro.com/item/EXT-HD4KEARC-70M): Extend 4K HDMI and eARC/ARC over a single CAT6A/7 cable up to 70m. HDBaseT 3.0, HDCP 2.3, Dolby Atmos, bi-directional IR, RS-232 & 24V PoC. TX/RX kit. - [EXT-HD4KFIB-10KM — 4K60 HDMI over Fiber Extender Kit (10km/6.2mi)](https://kanexpro.com/item/EXT-HD4KFIB-10KM): EXT-HD4KFIB-10KM extends 4K60 4:4:4 HDMI with HDR and lossless audio up to 10km over single-mode fiber (300m over OM4 with multi-mode SFP modules) with 10G SFP+ ports and LC connectors. - [EXT-HD4KFIBCTL-10KM — 4K60 HDMI-over-Fiber Extender with Full Control over Fiber (10km)](https://kanexpro.com/item/EXT-HD4KFIBCTL-10KM): EXT-HD4KFIBCTL-10KM extends 4K60 4:4:4 HDCP 2.2 HDMI, USB KVM, bi-directional IR, RS-232 and de-embedded audio up to 10km over single-mode fiber. - [EXT-HD4KFIBKVM-10KM — 4K60 HDMI-over-Fiber Extender with USB KVM (10km)](https://kanexpro.com/item/EXT-HD4KFIBKVM-10KM): EXT-HD4KFIBKVM-10KM: 4K60 4:4:4 HDMI-over-fiber extender kit with USB KVM, HDCP 2.2, 18Gbps and HDR, up to 10km on single-mode fiber. Point-to-point, no switch. - [EXT-HD50C — HDMI Extender over Cat5e/6 with Loop-Out - 70M 1080p / 40M 4K@30Hz (Cat6)](https://kanexpro.com/item/EXT-HD50C): EXT-HD50C HDMI extender kit with loop-out: 1080p to 70M or 4K@30Hz to 40M over one Cat6 cable. EDID copy, IR from the display end, Dolby TrueHD, DTS-HD. - [EXT-HD60M — 1080p HDMI Extender over CAT6 up to 196ft (60m)](https://kanexpro.com/item/EXT-HD60M): KanexPro EXT-HD60M 1080p HDMI extender over CAT6 up to 196ft (60m). HDCP 1.4, IR pass-through, local HDMI loop-out, Deep Color 48-bit. - [EXT-HD8K-150M — 8K HDMI 2.1 over HDBaseT Extender Kit, 8K30/4K120 to 90m, 1080p to 150m/492ft](https://kanexpro.com/item/EXT-HD8K-150M): KanexPro EXT-HD8K-150M HDMI 2.1 HDBaseT extender kit: 8K30/4K120 to 90m, 4K60 to 120m, 1080p to 150m over CAT6. HDCP 2.3, IR, RS-232 and PoC from one supply. - [EXT-HDBT150M — HDBaseT HDMI Extender over Cat6 - 150M (492 ft.) with PoC](https://kanexpro.com/item/EXT-HDBT150M): KanexPro EXT-HDBT150M HDBaseT HDMI extender kit: 1080p@60Hz up to 150M (492 ft.) over one Cat6 STP. PoC single PSU, HDMI loop-out, RS-232, IR. 3-year warranty. - [EXT-HDBT18G-70M — 18Gbps 4K60 HDMI over HDBaseT Extender Kit with PoC - 40m 4K / 70m 1080p](https://kanexpro.com/item/EXT-HDBT18G-70M): EXT-HDBT18G-70M 18Gbps HDMI over HDBaseT extender kit: 4K60 4:4:4 HDR to 40m, 1080p to 70m, PoC from one adaptor, bi-directional IR and RS-232 over one CAT6. - [EXT-HDBT3ARC-100M — HDBaseT 3.0 4K HDMI Extender Kit with eARC and USB 2.0 - 328ft](https://kanexpro.com/item/EXT-HDBT3ARC-100M): KanexPro EXT-HDBT3ARC-100M HDBaseT 3.0 extender sends uncompressed 4K@60Hz 4:4:4 HDMI, eARC/ARC, USB 2.0, IR, RS-232 and GbE up to 328ft over a CAT6A/7 cable. - [EXT-HDBT3ARC-TX — 4K HDMI/eARC HDBaseT 3.0 Transmitter (100m) with USB 2.0 & Ethernet](https://kanexpro.com/item/EXT-HDBT3ARC-TX): KanexPro EXT-HDBT3ARC-TX HDBaseT 3.0 transmitter: 4K60 4:4:4 HDMI, eARC audio return, USB 2.0, RS-232, IR and Gigabit Ethernet to 328ft (100m) over one CAT6A. - [EXT-HDBT70C — 4K30Hz HDBaseT HDMI Extender over Cat5e/6 with PoC - 70M](https://kanexpro.com/item/EXT-HDBT70C): EXT-HDBT70C HDBaseT HDMI extender kit sends 4K30 to 40m and 1080p to 70m over one Cat5e/6, with PoC, bi-directional IR and RS-232, and HDCP 2.2. - [EXT-HDMICAS70M — 4K60Hz HDMI Cascading Extender Kit over Cat6 - 70M](https://kanexpro.com/item/EXT-HDMICAS70M): KanexPro EXT-HDMICAS70M cascading HDMI extender — 4K@60Hz HDR to up to 10 displays over Cat6 to 70M per run. Daisy-chained, bi-directional IR, 3-year warranty. - [EXT-HDMICAS70MRX — 4K60Hz HDMI Cascading Extender Add-on Receiver over Cat6 - 70M, for EXT-HDMICAS70M](https://kanexpro.com/item/EXT-HDMICAS70MRX): EXT-HDMICAS70MRX: add-on receiver for EXT-HDMICAS70M cascading HDMI extender. Each adds one display, up to 10 per chain; 4K@60Hz over Cat6 up to 70M per run. - [EXT-HDMIKVM4K-40M — 4K60 & Ultrawide HDMI KVM Extender with USB 3.2 over CAT6a (40m/130ft)](https://kanexpro.com/item/EXT-HDMIKVM4K-40M): KanexPro EXT-HDMIKVM4K-40M extends 4K60 4:4:4 HDMI, USB 3.2 at 2.5Gbps, audio and RS-232 to 40m over one CAT6a cable. HDMI loop out, ultrawide, HDCP 2.3. - [EXT-HDMIKVM70M — 4K60Hz HDMI KVM Extender over Cat6 - 70M](https://kanexpro.com/item/EXT-HDMIKVM70M): EXT-HDMIKVM70M HDMI KVM extender: 4K@60Hz 4:4:4 HDR plus USB 2.0 keyboard, mouse, touchscreen, PTZ camera over one Cat6 to 70M (230 ft). Zero latency, HDCP 2.2. - [EXT-SDHDX — 3G-SDI to HDMI Converter](https://kanexpro.com/item/EXT-SDHDX): KanexPro EXT-SDHDX converts SD, HD and 3G-SDI to HDMI with signal re-clocking, equalization and an 8-channel 48KHz audio de-embedder. - [EXT-SDIVGA — 3G/HD-SDI/ SDI to VGA Converter w/ Scaling Technology](https://kanexpro.com/item/EXT-SDIVGA): Convert SDI signals from a camera or splitter into VGA that can be used with a monitor or display - [EXT-USB2100M — USB 2.0 Extender over Cat5e/6 to 100m (328ft) with 2-Port USB-A Receiver](https://kanexpro.com/item/EXT-USB2100M): KanexPro EXT-USB2100M USB 2.0 extender: 480Mbps to 100m/328ft over one Cat5e/6 cable, two USB-A ports at the receiver, plug-and-play, one power adapter. - [EXT-USB250M — USB 2.0 Extender over Cat5e/6 to 50m (164ft) with 2-Port USB-A Receiver](https://kanexpro.com/item/EXT-USB250M): KanexPro EXT-USB250M USB 2.0 extender: 480Mbps up to 50m (164ft) over one Cat5e/6 cable, two USB-A ports at the receiver, bus-powered transmitter, no drivers. - [EXT-USB3100M — USB 3.0 Extender Over Shielded Cat6A 100M HDBaseT](https://kanexpro.com/item/EXT-USB3100M): KanexPro EXT-USB3100M extends USB 3.0 at 5Gbps to 100m/328ft over one shielded Cat6A cable via HDBaseT: 4 USB-A ports, RS-232, FSYNC and 24V PoC, no drivers. - [EXT-USBC-100M — 5Gbps USB-C 3.2 Gen 1 Extender over CAT6a (100m/328ft)](https://kanexpro.com/item/EXT-USBC-100M): KanexPro EXT-USBC-100M extends USB 3.2 Gen 1 up to 100m over CAT6a with 5Gbps speed, bi-directional 24V PoC, RS-232 pass-through, and FSYNC GPIO support. - [EXT-USBC2C4K-40M — 5K2K USB-C to USB-C Extender Kit with USB 3.2, 100W Charging and Touch Return, 40m](https://kanexpro.com/item/EXT-USBC2C4K-40M): KanexPro EXT-USBC2C4K-40M USB-C to USB-C extender kit: 4K60 DP Alt Mode, USB 3.2 touch return, 100W PD over one CAT6a to 40m/130ft for interactive displays. - [EXT-USBC2XI-100M — Dual-Host USB 3.2 Gen 1 Extender over CAT6a — USB-C & USB-B Inputs, 100m/328ft](https://kanexpro.com/item/EXT-USBC2XI-100M): KanexPro EXT-USBC2XI-100M: USB 3.2 Gen 1 (5Gbps) extender to 100m over CAT6a with USB-C and USB-B host inputs, RS-232 pass-through, FSYNC pass-through and bi-directional 24V PoC. - [EXT-USBC4KFIB-10KM — Native USB-C DisplayPort Alt Mode 4K60 Extender over Fiber — 10G SFP+, up to 10km](https://kanexpro.com/item/EXT-USBC4KFIB-10KM): EXT-USBC4KFIB-10KM: native USB-C DP Alt Mode 4K60 4:4:4 extender over fiber to 10km via 10G SFP+. HDR pass-through, Atmos/DTS:X, EDID passback, no dongle. - [EXT-USBCPD2X4K-100M — 5Gbps Dual-Host USB-C Extender over CAT6a (100m/328ft) with Dual 4K HDMI Out](https://kanexpro.com/item/EXT-USBCPD2X4K-100M): KanexPro EXT-USBCPD2X4K-100M, USB 3.2 Gen 1 Extender 100m, Dual USB-C Host Extender, USB over CAT6a, HDBaseT USB3 Extender, Dual HDMI Output USB Extender, USB-C Charging Extender 100W, Industrial USB Video Extender, RS-232 FSYNC USB Extender, PoC USB Extender, Professional AV USB Extension - [EXT-USBCPD4K-40M — 5K2K USB-C Extender Kit with USB 3.2, 100W Charging and HDMI Output, 40m](https://kanexpro.com/item/EXT-USBCPD4K-40M): KanexPro EXT-USBCPD4K-40M USB-C extender kit: 4K60 HDMI out, USB 3.2 Gen 1, 100W PD charging, RS-232 and audio over one CAT6a to 40m/130ft for BYOD rooms. - [EXT-USBCPD4K-70M — 18Gbps USB-C HDBaseT 3.0 Extender with 100W PD (4K60 to 40m, 4K30 to 70m)](https://kanexpro.com/item/EXT-USBCPD4K-70M): EXT-USBCPD4K-70M HDBaseT 3.0 USB-C extender: 4K60 4:4:4 to 40m, 4K30 to 70m over one CAT6A/7 cable, USB 2.0, 100W PD via your charger, HDCP 2.3, RS-232. - [FCLC10G-10M — 10G Fiber Optic Cable (LC to LC) - 10M](https://kanexpro.com/item/FCLC10G-10M): Super high-speed, error-free data transmission - [FCLC10G-5M — 10G Fiber Optic Cable (LC to LC) - 5M](https://kanexpro.com/item/FCLC10G-5M): Super high-speed, error-free data transmission - [FCLCMM-10M — Duplex Fiber Optic Cable (LC to LC) - 10M](https://kanexpro.com/item/FCLCMM-10M): Multi Mode Duplex Cable For Fibre Channel - [FCLCMM-1M — Duplex Fiber Optic Cable (LC to LC) - 1M](https://kanexpro.com/item/FCLCMM-1M): Multi Mode Duplex Cable For Fibre Channel - [FCLCMM-25M — Duplex Fiber Optic Cable (LC to LC) - 25M](https://kanexpro.com/item/FCLCMM-25M): Multi Mode Duplex Cable For Fibre Channel - [FCLCMM-5M — Duplex Fiber Optic Cable (LC to LC) - 5M](https://kanexpro.com/item/FCLCMM-5M): Multi Mode Duplex Cable For Fibre Channel - [FLEX-CAT12OUT — CATx Output Card for FLEX Modular Matrix](https://kanexpro.com/item/FLEX-CAT12OUT): KanexPro FLEX-CAT12OUT 12-port CATx output card with 4K60 4:4:4, HDR, PoC, and long-distance signal extension over CAT5e/6/6A for FLEX modular matrix switcher chassis. - [FLEX-CATRX — FLEX Series 4K60 CAT Receiver](https://kanexpro.com/item/FLEX-CATRX): KanexPro FLEX-CATRX 4K60 4:4:4 CAT receiver with Power over Cable for FLEX modular matrix systems. Extends 4K up to 165ft — no remote power required. - [FLEX-HDMI12OUT — HDMI 2.0 Output Card for FLEX Modular Matrix](https://kanexpro.com/item/FLEX-HDMI12OUT): KanexPro FLEX-HDMI12OUT 12-port HDMI 2.0 output card with 18Gbps, HDCP 2.2, HDR, and 4K60 4:4:4 support for FLEX modular matrix switcher chassis. - [FLEX-HDMI8IN — HDMI 2.0 Input Card for FLEX Modular Matrix](https://kanexpro.com/item/FLEX-HDMI8IN): KanexPro FLEX-HDMI8IN 8-port HDMI 2.0 input card with 18Gbps, HDCP 2.2, HDR, and 4K60 4:4:4 support for FLEX modular matrix switcher chassis. - [FLEX-MF16X20 — 16×20 4K60 Modular Matrix Switcher with Built-In Video Wall](https://kanexpro.com/item/FLEX-MF16X20): KanexPro FLEX-MF16X20 modular 16x20 matrix switcher delivers 4K60 18Gbps switching with built-in video wall, quad view, independent scaling, and CEC control. - [FLEX-MF24X36 — 24×36 4K60 Modular Matrix Switcher with Built-In Video Wall](https://kanexpro.com/item/FLEX-MF24X36): KanexPro FLEX-MF24X36 modular 24x36 matrix switcher delivers 4K60 18Gbps switching with built-in video wall, quad view, independent scaling, and CEC control. - [FLEX-MF24X60 — 24×60 4K60 Modular Matrix Switcher with Built-In Video Wall](https://kanexpro.com/item/FLEX-MF24X60): KanexPro FLEX-MF24X60 modular 24x60 matrix switcher delivers 4K60 18Gbps switching with built-in video wall, quad view, independent scaling, and CEC control. - [FLEX-MF8X10 — 8×10 4K60 Modular Matrix Switcher with Built-In Video Wall](https://kanexpro.com/item/FLEX-MF8X10): KanexPro FLEX-MF8X10 modular 4K60 matrix chassis with independent per-output scaling, video wall, quad view, and CEC. - [HAECOAX — HDMI Audio De-Embedder 1080p - HDMI to Optical, Coaxial S/PDIF and 3.5mm Stereo, 2.0/5.1CH](https://kanexpro.com/item/HAECOAX): KanexPro HAECOAX HDMI audio de-embedder: extracts audio from 1080p HDMI to optical, coaxial S/PDIF and 3.5mm stereo, 2.0/5.1CH button, HDMI out to the display. - [HAECOAX3 — 18Gbps 4K60 HDMI Audio Extractor with Optical 5.1 and Analog Stereo Out, Dolby Atmos/DTS:X Pass-Through](https://kanexpro.com/item/HAECOAX3): KanexPro HAECOAX3 18Gbps 4K60 HDMI audio extractor: Toslink optical 5.1 and 3.5mm stereo out, Dolby Atmos/DTS:X HDMI pass-through, 10-bit HDR, HDCP 2.2, CEC. - [HAECOAX4 — 4K@60Hz HDMI 2.0b Audio Embedder with Optical S/PDIF and 3.5mm Analog Audio Inputs](https://kanexpro.com/item/HAECOAX4): KanexPro HAECOAX4 4K HDMI audio embedder: replaces HDMI audio with optical S/PDIF or 3.5mm analog. 18Gbps HDMI 2.0b, 4K@60Hz 4:4:4, 10-bit HDR, HDCP 2.2. - [HDEXT50M — 1080p60 HDMI Extender over Single Cat6/6a - 50M](https://kanexpro.com/item/HDEXT50M): HDEXT50M extends 1080p60 HDMI over one Cat6/6a cable to 50m/164ft. One-way PoC powers the receiver; bi-directional IR, HDMI loop-out, EDID pass-through. - [HDMX42-18G — 4×2 HDMI 2.0 Matrix Switcher with WebGUI, Telnet & RS-232 Control](https://kanexpro.com/item/HDMX42-18G): KanexPro HDMX42-18G 4×2 HDMI 2.0 matrix switcher with WebGUI, Telnet, and RS-232 control. 4K/60Hz 4:4:4, Apple HDCP mode, 7 EDID presets. CE/FCC/UL certified. - [HDMX42A-18G — 4×2 HDMI 2.0 Matrix Switcher with Optical & Analog Audio Extraction](https://kanexpro.com/item/HDMX42A-18G): KanexPro HDMX42A-18G 4x2 HDMI 2.0 matrix, 18Gbps 4K@60Hz 4:4:4, with optical and analog L/R audio extraction, ARC, 4K to 1080p downscaling and Dolby Vision. - [HDMX44A-18G — 4×4 HDMI 2.0 Matrix Switcher with Independent Analog Audio Outputs](https://kanexpro.com/item/HDMX44A-18G): KanexPro HDMX44A-18G 4×4 HDMI 2.0 matrix switcher with analog stereo DAC output on every channel. 4K/60Hz 4:4:4, WebGUI, Telnet, RS-232, OSD, 14 EDID modes. CE/FCC/UL certified. - [HDSC92D-4K — KanexPro 9 by 2 multi-format scaling switcher with HDBT In and Out](https://kanexpro.com/item/HDSC92D-4K): HDSC92D-4K is a 9 by 2 multi-format scaling switcher provides HDMI, USB-C, HDMI Extender, and VGA inputs which can be freely selected for output at a scaled resolution of the user’s choosing over the mirrored HDMI and HDMI Extender outputs. - [HDSC92D-4KRX — KanexPro Output Extender for HDSC92D-4K scaler](https://kanexpro.com/item/HDSC92D-4KRX): HDMI over single Cat5e/6 Receiver can receive uncompressed audio/video and IP data over a single run of CAT5e/6/ cable at a distance up to 100 meters. - [HDSC92D-4KTX — KanexPro Input Extender for HDSC92D-4K scaler](https://kanexpro.com/item/HDSC92D-4KTX): HDMI over single Cat5e/6 Transmitter can send uncompressed audio/video and IP data over a single run of CAT5e/6/ cable at a distance up to 100 meters. - [KVM-2X1DUAL8K — 2×1 Dual-Display HDMI 2.1 KVM Switch — 8K60, HDCP 2.3](https://kanexpro.com/item/KVM-2X1DUAL8K): KanexPro KVM-2X1DUAL8K dual-monitor KVM switch shares two HDMI 2.1 displays, keyboard, mouse and USB 3.0 between two PCs. 8K60, HDCP 2.3, hotkeys, IR, RS-232. - [KVM-2X1HDMI8K — 2×1 HDMI 2.1 KVM Switch — 8K60, 4K120/144, USB 3.0, HDCP 2.3](https://kanexpro.com/item/KVM-2X1HDMI8K): KVM-2X1HDMI8K HDMI 2.1 KVM switch: two PCs share one display, keyboard, mouse and USB 3.0. 8K60 4:2:0, 4K120/144Hz, VRR, ALLM, HDCP 2.3, zero latency. - [KVM-4X1MV4K — 4×1 HDMI KVM Switch with MultiView Tiling — 4K60](https://kanexpro.com/item/KVM-4X1MV4K): KanexPro KVM-4X1MV4K 4x1 HDMI KVM switch and multiviewer: 4 PCs on one 4K60 display in PIP, PBP, Triple or Quad, USB 3.0, seamless single-view switching. - [MMX-16X16AUD — 18Gbps 16×16 HDMI Matrix with ARC Function](https://kanexpro.com/item/MMX-16X16AUD): MMX-16X16AUD 18Gbps 16x16 HDMI matrix with ARC. 4K60 4:4:4 HDR, coaxial audio de-embedding, Dolby Atmos, DTS:X. HDMI 2.0b, HDCP 2.2, 1U rack mount - [MMX-4X4-48G — 48Gbps 4×4 HDMI 2.1 Matrix Switcher with Per-Output Downscaling & Audio Breakout](https://kanexpro.com/item/MMX-4X4-48G): MMX-4X4-48G: 48Gbps 4×4 HDMI 2.1 matrix with per-output downscaling, HDR conversion, full VRR/ALLM/QMS/QFT/SBTM gaming, and optical & balanced audio breakout. - [MMX-4X4AUD — 4K60 4:4:4 4×4 HDMI Matrix with Independent Per-Output Scaling](https://kanexpro.com/item/MMX-4X4AUD): MMX-4X4AUD 4×4 HDMI matrix routes four 4K60 4:4:4 sources to four displays with per-output 4K to 1080p scaling, dual audio de-embed, ARC and 18Gbps HDR. - [MMX-4X4CAT-150M — 4×4 HDBaseT Matrix Switcher with CAT Extension (4K60 to 120m, 1080p to 150m)](https://kanexpro.com/item/MMX-4X4CAT-150M): KanexPro MMX-4X4CAT-150M 4x4 HDMI matrix, 18Gbps: 4 HDMI outputs, each mirrored on an HDBaseT port. 4K60 to 120m, 1080p to 150m, 24V PoC receivers, Web GUI. - [MMX-4X4CAT-70M — 4×4 HDBaseT Matrix Switcher with 4K60 & CAT Extension (70m)](https://kanexpro.com/item/MMX-4X4CAT-70M): KanexPro MMX-4X4CAT-70M 4x4 HDBaseT matrix with 4K60 18Gbps, 230ft, 70m, PoC receivers, HDR, RelayAV control. - [MMX-4X4VW — 4K 4×4 Seamless Matrix & Video Wall Processor](https://kanexpro.com/item/MMX-4X4VW): KanexPro MMX-4X4VW: 4x4 HDMI 1.4b matrix switcher with a built-in video wall processor. Seamless switching, per-output scaling up to 4K@30Hz in matrix mode, 1080p per screen in wall mode. Front panel, IR or RS-232 control. - [MMX-4X4VWMV — 4K60 4×4 Seamless Matrix, Video Wall & Multiviewer Processor](https://kanexpro.com/item/MMX-4X4VWMV): MMX-4X4VWMV is a 4K60 4:4:4 4×4 seamless HDMI matrix, video wall and multiviewer processor with 9 splicing modes, audio de-embedding and RS-232/IP/Web control. - [MMX-8X8AUD — 18Gbps 8×8 HDMI Matrix with ARC Function](https://kanexpro.com/item/MMX-8X8AUD): KanexPro MMX-8X8AUD 18Gbps 8x8 HDMI matrix with ARC, audio de-embedding, 4K60 4:4:4, Dolby Vision, HDR10+, per-output downscaler. RS-232, TCP/IP, Web GUI control - [MMX-8X8CAT-150M — 8×8 HDBaseT Matrix Switcher with 4K60 & CAT Extension (150m)](https://kanexpro.com/item/MMX-8X8CAT-150M): KanexPro MMX-8X8CAT-150M 8x8 HDBaseT matrix with 4K60 18Gbps, 492ft, 150m, PoC receivers, HDR, Web GUI. - [MMX-8X8CAT-70M — 8×8 HDMI Matrix Switcher, 8 Mirrored HDBaseT Outputs & PoC Receivers, 4K60 4:4:4 to 70m](https://kanexpro.com/item/MMX-8X8CAT-70M): KanexPro MMX-8X8CAT-70M 8x8 HDMI matrix: 8 HDMI plus 8 mirrored HDBaseT outputs, 4K60 4:4:4 to 230ft/70m over one CAT6, 8 PoC receivers included, RelayAV. - [SDI-EXTFIBERPRO — Fiber Optic SDI Extender Set - Up to 6.2 miles (10Km)](https://kanexpro.com/item/SDI-EXTFIBERPRO): Extend 3G/HD-SDI Signals on a Single Mode Optical Extender - [SDI-HDRPTPRO — HD-SDI Repeater with Signal Equalization & Re-clocking](https://kanexpro.com/item/SDI-HDRPTPRO): Extend SDI or Daisy chain multiple SDI repeaters to create longer runs - [SDI-HDSDXPRO — HDMI to 3G-SDI Converter with Dual SDI Outputs, Re-Clocking & EQ, up to 1080p60](https://kanexpro.com/item/SDI-HDSDXPRO): HDMI to SDI converter: one HDMI input to two 3G/HD/SD-SDI BNC outputs, up to 1080p60, re-clocking and EQ, 2-channel audio, up to 130 m 3G-SDI on RG59 coax. - [SDI-SDHDXPRO — 3G/HD/SD-SDI to HDMI Converter with 2 Re-Clocked SDI Loop Outputs & Signal EQ](https://kanexpro.com/item/SDI-SDHDXPRO): SDI to HDMI converter for SD, HD and 3G-SDI up to 1080p60. Two re-clocked SDI loop outputs, 2-channel audio, automatic SD/HD/3G switching, 3G runs up to 130 m. - [SDI-SDI2MULTIPRO — SDI/HDMI with Audio Embedder to Multiple Video - Discontinued](https://kanexpro.com/item/SDI-SDI2MULTIPRO): Convert 3G/HD/SD-SDI & HDMI to DVI-D, VGA, Component, S-video or Composite - [SP-1X2A8K — 8K 1×2 HDMI 2.1 Splitter with Optical and Analog L/R Audio De-Embedding](https://kanexpro.com/item/SP-1X2A8K): KanexPro SP-1X2A8K 1x2 HDMI 2.1 splitter: 8K60 4:2:0, 4K120 4:4:4, 40Gbps, HDCP 2.3, Dolby Vision, VRR/ALLM, with optical and analog L/R audio out. - [SP-1X4A8K — 8K 1×4 HDMI 2.1 Splitter with Audio De-Embedding](https://kanexpro.com/item/SP-1X4A8K): KanexPro SP-1X4A8K 8K 1x4 HDMI 2.1 splitter with audio de-embedding. 40Gbps, HDCP 2.3, optical S/PDIF + 3.5mm, 4K@120Hz, VRR/ALLM, 8-mode EDID. - [SP-1X4HD150M — 1×4 HDMI Distribution Amplifier over CAT6 with PoC — 4K60 to 120m, 1080p to 150m](https://kanexpro.com/item/SP-1X4HD150M): KanexPro SP-1X4HD150M 1x4 HDMI splitter extender kit: one source to four displays over CAT6, 4K60 to 120m, 1080p to 150m, with PoC, HDCP 2.2, HDR, IR, RS-232. - [SP-1X8HD150M — 1×8 HDMI Splitter Extender over CAT6 with 8 Receivers — 4K60 to 120m, 1080p to 150m](https://kanexpro.com/item/SP-1X8HD150M): KanexPro SP-1X8HD150M 1x8 HDMI splitter extender: one source to eight displays over CAT6, 4K60 to 120m, 1080p to 150m, with PoC, HDCP 2.2, HDR, IR and RS-232. - [SP-HD1X24K — 4K@30Hz 1×2 HDMI Splitter with EDID Selector](https://kanexpro.com/item/SP-HD1X24K): KanexPro SP-HD1X24K 1x2 HDMI splitter sends one source to two displays at up to 4K@30Hz. EDID Copy/Auto modes, HDCP, CEC pass-through, USB powered. - [SP-HD1X28K — 8K 1×2 HDMI 2.1 Splitter with Auto Downscaling and HDR to SDR](https://kanexpro.com/item/SP-HD1X28K): KanexPro SP-HD1X28K 8K 1x2 HDMI 2.1 splitter: auto downscales each output to 4K or 1080p and converts HDR to SDR for SDR displays. 48Gbps, HDCP 2.3, Atmos. - [SP-HD1X44K — 4K 1×4 HDMI Splitter with HDR and EDID Management](https://kanexpro.com/item/SP-HD1X44K): KanexPro SP-HD1X44K 4K 1x4 HDMI splitter sends one source to four displays at 4K@60Hz 4:2:0 with HDR10, Dolby Vision, HDCP 1.4 and a STD/TV EDID switch. - [SP-HD1X48K — 8K 1×4 HDMI 2.1 Splitter with Auto Downscaling](https://kanexpro.com/item/SP-HD1X48K): KanexPro SP-HD1X48K 8K 1x4 HDMI 2.1 splitter with auto downscaling and HDR-to-SDR converting. 48Gbps, HDCP 2.3, Dolby Atmos, DTS:X, 8-mode EDID. - [SP-HDMI1X2-18G — 4K60 1×2 HDMI Splitter with Auto Downscaling & EDID Control](https://kanexpro.com/item/SP-HDMI1X2-18G): SP-HDMI1X2-18G is an 18Gbps 4K60 4:4:4 1×2 HDMI splitter with auto downscaling, EDID control, HDCP 2.3 and HDR10+/Dolby Vision pass-through to two displays. - [SP-HDMI1X4-18G — 4K60 4:4:4 1×4 HDMI Distribution Amplifier with EDID Management](https://kanexpro.com/item/SP-HDMI1X4-18G): SP-HDMI1X4-18G distributes one 4K60 4:4:4 HDMI source to four displays at 18Gbps with HDCP 2.3, HDR10+/Dolby Vision, 7.1CH audio and STD/TV EDID control. - [SP-HDMI1X4A-18G — 4K60 1×4 HDMI Splitter with Optical + Analog Audio Extraction](https://kanexpro.com/item/SP-HDMI1X4A-18G): SP-HDMI1X4A-18G: 1×4 4K60 HDMI splitter with optical S/PDIF and 3.5mm analog audio extraction, 18Gbps HDCP 2.2, EDID COPY/AUTO and 4K-to-1080p downscaling. - [SP-HDMI1X8-18G — 1×8 HDMI Splitter with Independent 4K to 1080p Downscaling](https://kanexpro.com/item/SP-HDMI1X8-18G): SP-HDMI1X8-18G distributes one 4K60 source to eight HDMI displays with per-output 4K-to-1080p downscaling, 18Gbps 4:4:4, HDCP 2.2, HDR and COPY/AUTO EDID. - [SP-HDMI2X4-8K — 48Gbps 8K 2-In 4-Out HDMI Switching Splitter with Downscaling & Audio De-embedding](https://kanexpro.com/item/SP-HDMI2X4-8K): KanexPro SP-HDMI2X4-8K 2x4 HDMI 2.1 switching splitter: 1 of 2 sources to 4 displays at 8K@60Hz 4:2:0, downscaling, optical and balanced audio out, RS-232. - [SP-HDMI2X8-8K — 48Gbps 8K 2-In 8-Out HDMI Switching Splitter with Independent Downscaling & Audio De-embedding](https://kanexpro.com/item/SP-HDMI2X8-8K): KanexPro SP-HDMI2X8-8K sends 1 of 2 HDMI 2.1 sources to 8 displays at up to 8K@60Hz, with per-output downscaling, HDR to SDR and audio de-embedding. - [SP-HDPOC1X4 — 4K60 1×4 HDMI Distribution Amplifier over CAT6 — 60m/197ft](https://kanexpro.com/item/SP-HDPOC1X4): KanexPro SP-HDPOC1X4 splits one 4K60 HDMI source to four CAT-connected displays at up to 60m in a compact half-rack enclosure with PoC, HDR, HDCP 2.2, and audio extraction. - [SP-HDPOC1X8 — 1×8 HDMI Splitter & Distribution Amplifier over CAT6 with PoC — 4K60 to 35m, 1080p to 60m/197ft](https://kanexpro.com/item/SP-HDPOC1X8): KanexPro SP-HDPOC1X8 1x8 HDMI splitter over CAT6: eight PoC receivers, 4K60 4:4:4 to 35m, 1080p to 60m/197ft, HDR, HDCP 2.2, audio extraction, IR, loop out. - [SW-2X18K — 8K 2×1 HDMI 2.1 Switcher, 48Gbps, Auto-Switch, USB Powered](https://kanexpro.com/item/SW-2X18K): KanexPro SW-2X18K 8K 2x1 HDMI 2.1 switch: two sources to one display, 48Gbps, 8K60 4:4:4, 4K120, HDR10+/Dolby Vision, VRR/ALLM, auto-switch, USB powered. - [SW-2X1A8K — 8K 2×1 HDMI 2.1 Switcher with Audio De-Embedding](https://kanexpro.com/item/SW-2X1A8K): KanexPro SW-2X1A8K 8K 2x1 HDMI 2.1 switcher, 40Gbps, HDCP 2.3, 4K@120Hz, HDR/Dolby Vision, with audio de-embedding to optical and 3.5mm analog outputs. - [SW-4X18K — 8K 4×1 HDMI 2.1 Switcher with Auto-Switch and IR Remote](https://kanexpro.com/item/SW-4X18K): KanexPro SW-4X18K 8K 4x1 HDMI 2.1 switcher: 48Gbps, 8K60 4:4:4, 4K120, HDR10+/Dolby Vision, VRR/ALLM, HDCP 2.3, auto-switch, IR remote and front button. - [SW-4X1HDAUD — 4×1 4K HDMI Switcher with ARC, Audio Extraction, and RS-232](https://kanexpro.com/item/SW-4X1HDAUD): KanexPro SW-4X1HDAUD 4x1 4K HDMI switcher with ARC, audio extraction, and RS-232. 18Gbps, HDCP 2.2, Dolby TrueHD/DTS-HD 7.1, optical + analog audio output. - [SW-4X1HDUSBC — 48Gbps 4x1 HDMI/USB-C Auto Switcher with 8K60 and EDID Management](https://kanexpro.com/item/SW-4X1HDUSBC): KanexPro SW-4X1HDUSBC 4x1 auto switcher: 3 HDMI 2.1 + 1 USB-C (DP Alt Mode) in, 1 HDMI out. 48Gbps, 8K@60Hz 4:2:0, 4K@120Hz, VRR, ALLM, HDCP 2.3, EDID presets. - [SW-4X2PS-70M — 4×2 HDMI/USB-C 4K60 Seamless Presentation Switch with HDBaseT 3.0 Out (4K60 40m, 1080p 70m)](https://kanexpro.com/item/SW-4X2PS-70M): KanexPro SW-4X2PS-70M 4x2 4K60 seamless presentation switch: USB-C 60W PD, multiview, USB KVM, Dante audio, HDBaseT 3.0 out (4K60 to 40m, 1080p to 70m). - [SW-5X1PS-70M — 5×1 HDMI/USB-C Seamless Presentation Switch with HDBaseT 3.0 Out — 4K60 to 40m, 4K30 to 70m](https://kanexpro.com/item/SW-5X1PS-70M): KanexPro SW-5X1PS-70M, 5×1 Presentation Switcher, HDMI USB-C Seamless Switch, 4K60 Multiview Switcher, HDBT Extender, Dante Audio, USB-C 60W Charging Switch, Conference Room AV Switcher, KVM Presentation Switch, Professional AV Control System - [VGAEXTX1 — VGA 1x1 Extender over CAT5e/6 with Audio up to 1,000ft (300m)](https://kanexpro.com/item/VGAEXTX1): Extend high-resolution VGA signals over a single CAT5e/6 cable - [VGAEXTX2 — VGA 1x2 Extender over CAT5e/6](https://kanexpro.com/item/VGAEXTX2): Extend up to two high-resolution VGA displays over CAT5e/6 cable - [VGARLHD — VGA to HDMI with Audio Converter](https://kanexpro.com/item/VGARLHD): Convert VGA signal + Audio to HDMI - [VW-HDUSBC1X4 — 4K60 HDMI/USB-C Input 1×4 Video Wall Controller with Bezel Compensation](https://kanexpro.com/item/VW-HDUSBC1X4): KanexPro VW-HDUSBC1X4 1x4 video wall controller: 4K60 HDMI or USB-C input across 2x2 or 1x4 walls, bezel compensation, audio de-embedding and RS-232 control. - [VW-MVIEW4X1 — HDMI 4x1 Quad Multi-View Seamless Switcher 4K@60 4:4:4](https://kanexpro.com/item/VW-MVIEW4X1): KanexPro VW-MVIEW4X1 HDMI 4x1 quad multiviewer: four 4K@60Hz 4:4:4 sources on one display, seamless switching, 8 layouts, audio de-embedding, RS-232 control. - [VW-SP1X44K — 1×4 HDMI 4K UHD Video Wall Processor with Bezel Correction](https://kanexpro.com/item/VW-SP1X44K): Create Video Walls from 2x2, 2x3 & 3x3 screens up to 9-Displays - [WALLPRB4 — Adjustable Projector Wall/Ceiling Mount](https://kanexpro.com/item/WALLPRB4) - [WP-EXTHDBTKIT — Single-Gang HDMI 2.0 HDBaseT Wall Plate Extender Kit with IR, RS-232 & PoC — 4K/60 40M, 1080p 70M](https://kanexpro.com/item/WP-EXTHDBTKIT): KanexPro WP-EXTHDBTKIT single-gang HDMI 2.0 HDBaseT wall plate extender kit: 4K/60 4:4:4 to 40m, 1080p to 70m over one CAT5e/6, with IR, RS-232 and PoC. - [WP-EXTHDTC100 — 4K60 HDMI & USB-C 2-Gang Wall Plate Extender Kit with USB 2.0 and 60W Charging, 100m](https://kanexpro.com/item/WP-EXTHDTC100): WP-EXTHDTC100 2-gang HDMI & USB-C wall-plate extender kit: 4K60 4:4:4 HDR, USB 2.0 and 60W laptop charging over one CAT6/6A cable to 100m, with IR. - [WP-EXTHDTC150 — Long-Reach 2×1 HDMI & USB-C HDBaseT Wall Plate Extender Kit — 4K60 4:4:4](https://kanexpro.com/item/WP-EXTHDTC150): WP-EXTHDTC150 2×1 HDMI & USB-C HDBaseT wall-plate extender kit: uncompressed 4K60 4:4:4 to 120m over CAT6/6A with HDR, bi-directional PoC, IR & RS-232 control. - [WP-EXTHDTC50 — 2×1 HDMI & USB-C HDBaseT Wall Plate Extender Kit — 50 Meters](https://kanexpro.com/item/WP-EXTHDTC50): KanexPro WP-EXTHDTC50 HDMI & USB-C HDBaseT wall plate extender kit: 4K/60 4:4:4 to 35m, 4K/24 to 50m over one CAT5e/6, auto-switching, POC-powered wall plate. - [WP-EXTHDTC70 — 2×1 HDMI & USB-C HDBaseT Wall Plate Extender Kit with KVM](https://kanexpro.com/item/WP-EXTHDTC70): KanexPro WP-EXTHDTC70 HDMI & USB-C HDBaseT wall plate extender kit: 4K/60 4:4:4 to 40m, 1080p to 70m over one CAT6, USB 2.0 KVM, POE and auto-switching. - [WP-EXTUSB3100 — USB 3.2 Gen 1 Wall Plate Extender Kit, USB-C & USB-B Inputs, 100m — Wall Plate TX + Box RX](https://kanexpro.com/item/WP-EXTUSB3100): WP-EXTUSB3100 USB 3.2 Gen 1 wall plate extender kit: 5Gbps over CAT6a to 100m, USB-C and USB-B host inputs, auto-switching, RS-232 API, FSYNC and 24V PoC. - [WP-EXTUSB3100WP — USB 3.2 Gen 1 Wall Plate Extender Kit, USB-C & USB-B Inputs, 100m — Wall Plate TX + Wall Plate RX](https://kanexpro.com/item/WP-EXTUSB3100WP): WP-EXTUSB3100WP USB 3.2 Gen 1 wall plate extender kit: USB-B and USB-C hosts with auto switching, 100m over CAT6a, bi-directional PoC, RS-232 and FSYNC. - [WP-IPKEYPAD8 — 8-Button Programmable IP Wall Plate Keypad with PoE](https://kanexpro.com/item/WP-IPKEYPAD8): WP-IPKEYPAD8 8-button PoE IP wall plate keypad: sends TCP/IP macros to AV devices, 128 commands, relay output and scheduling. No control processor needed. ## Product films Narrated overviews for integrators. Each page plays the film and carries its full transcript. - [AUD-AMP-8K overview film (1:44)](https://b2b.kanexpro.com/products/aud-amp-8k): The KanexPro 8K HDMI 2.1 eARC Audio to Amplifier Adapter keeps an AV receiver in the system when the TV goes 8K: it sends the TV's eARC audio, or the source's, to the receiver over HDMI, with Dolby Atmos, TrueHD and DTS:X. Video passes through to the TV at up to 8K60 and 4K120 at 48 Gbps, with HDR10 - [AUD-DCODEARC-4K overview film (1:40)](https://b2b.kanexpro.com/products/aud-dcodearc-4k): The KanexPro HDMI ARC audio decoder takes the sound from a TV's HDMI ARC port and turns it into analog stereo. It decodes Dolby 5.1, DTS 5.1 and PCM 2.0, downmixed to two channels on RCA L/R and a 3.5mm jack at the same time, for an amplifier, powered speakers or headphones. CEC puts the volume on t - [AUD-DCODEHDMI-4K overview film (1:46)](https://b2b.kanexpro.com/products/aud-dcodehdmi-4k): The KanexPro 4K HDMI Audio Decoder & Down Mixer sits between any HDMI source and the display. In 2CH mode it decodes Dolby and DTS bitstreams and down-mixes them to analog stereo on RCA L/R, for an amplifier, DSP or distributed audio. In Bitstream mode its optical output carries Dolby Digital or DTS - [AUD-DEBED-8K overview film (2:09)](https://b2b.kanexpro.com/products/aud-debed-8k): The KanexPro 8K HDMI audio de-embedder passes HDMI 2.1 video at 48 Gbps, up to 8K60 or 4K120 with VRR, ALLM and HDR10+, while it sends the sound to optical and analog stereo outputs at the same time. ARC mode brings a TV's own sound back to the optical output for an amplifier with no HDMI input. - [AUD-DTE-2CHAMP overview film (3:30)](https://b2b.kanexpro.com/products/aud-dte-2champ): The KanexPro AUD-DTE-2CHAMP is a 150W Class D amplifier with built-in DSP and Dante: two channels in and two out on the Dante network (PCM 44.1–96 kHz, 16/24-bit), plus balanced stereo line in and line out. It drives a stereo pair of 4 or 8 ohm speakers at 2×75W, one 8 ohm speaker bridged at 150W, o - [AUD-DTE-30AMP overview film (2:02)](https://b2b.kanexpro.com/products/aud-dte-30amp): The KanexPro 30W Class D amplifier with Dante drives 4 or 8 ohm speakers at 2x 15W stereo or 30W bridged mono, and runs from one PoE+ network cable (2x 9W) or its 24V supply for full power. Dante 2x2 and AES67, two mic/line inputs with 48V phantom power, a line output, RS-232 and a trigger input; it - [AUD-DTE-70AMP overview film (1:55)](https://b2b.kanexpro.com/products/aud-dte-70amp): The KanexPro 70W Class D amplifier drives 4 or 8 ohm speakers at 2 × 35W stereo or 70W bridged mono from its 36V supply, or 2 × 25W from one Class 8 PoE++ cable alone, with Dante 2×2 audio on the same RJ45. A mic/line input with 48V phantom power, two mixers with ducking, an 8-band parametric EQ and - [AUD-DTE-ARC overview film (1:40)](https://b2b.kanexpro.com/products/aud-dte-arc): The KanexPro HDMI ARC to Dante adapter takes two-channel audio from a TV's HDMI ARC port and puts it on the Dante network, with AES67. Dante latency of 1, 2 or 5 ms is set in Dante Controller, where its name, channels and routes are set too. It runs from one PoE cable (802.3af) or a USB-C 5V supply, - [AUD-DTE-WPBT overview film (1:38)](https://b2b.kanexpro.com/products/aud-dte-wpbt): The KanexPro Bluetooth to Dante wall plate puts Bluetooth 5.1 audio from up to two phones, tablets or laptops onto a Dante network as two channels, with AES67 support. A US 1-gang plate, it runs from one 802.3af PoE cable or a 12V DC supply. Pairing can close by itself after a set time. It has a TCP - [AUD-DTE-WPXLR overview film (1:41)](https://b2b.kanexpro.com/products/aud-dte-wpxlr): The KanexPro 2x2 XLR and Dante wall plate puts two XLR mic/line inputs and two XLR line outputs on the Dante network from a standard US 2-gang Decora plate. Each input has its own 48V phantom power button, five-step input sensitivity and output gain knobs set levels at the plate, and Dante runs at u - [AUD-EARC-8K overview film (1:53)](https://b2b.kanexpro.com/products/aud-earc-8k): The KanexPro 8K HDMI eARC Audio Adapter sends one HDMI source, or the TV's own apps over eARC, to a soundbar, an amplifier, optical and analog L/R at the same time. Video passes through to the TV at up to 8K60 and 4K120 over HDMI 2.1, with Dolby Atmos and DTS:X on every HDMI output. An eARC button p - [AUD-EXT-ARC150M overview film (2:11)](https://b2b.kanexpro.com/products/aud-ext-arc150m): The KanexPro AUD-EXT-ARC150M sends a TV's HDMI ARC or optical S/PDIF audio up to 150 m (492 ft) at 96 kHz, or 90 m at 192 kHz, over one CAT5e/6/7 cable to an amplifier or soundbar. CEC passes through in ARC mode so the TV remote still sets the volume. Each unit runs on a 5V micro-USB supply. - [AUD-EXT-EARC100M overview film (2:15)](https://b2b.kanexpro.com/products/aud-ext-earc100m): The KanexPro AUD-EXT-EARC100M sends a TV's HDMI eARC audio, including Dolby Atmos, TrueHD and DTS-HD Master Audio, up to 100 m (328 ft) over one CAT cable to a soundbar or AV receiver. For TVs without eARC, an optical S/PDIF channel runs over the same cable. CEC passes through, and one 12V supply at - [AUD-SBAR-8K overview film (1:41)](https://b2b.kanexpro.com/products/aud-sbar-8k): The KanexPro 8K HDMI 2.1 eARC Audio to Soundbar Adapter sends the TV's eARC audio, or the HDMI source's, to any eARC soundbar on its own HDMI output, up to Dolby Atmos and DTS:X. Video passes through to the TV at up to 8K60 and 4K120 at 48 Gbps with no added latency, with HDR10, HDR10+, Dolby Vision - [CBL-AOCDP8K-30M overview film (1:37)](https://b2b.kanexpro.com/products/cbl-aocdp8k-30m): The KanexPro 8K DisplayPort 2.0 Active Optical Cable carries the full 40 Gbps UHBR10 signal (10 Gbps per lane) from a workstation or media server to a display far away: 8K at 60 Hz and 4K at 144 Hz, HDR with Dolby Vision, 48-bit color, AMD FreeSync 2.0, MST daisy-chaining and HDCP 1.4/2.2. A hybrid - [CBL-AOCHDMI8K-30M overview film (1:42)](https://b2b.kanexpro.com/products/cbl-aochdmi8k-30m): The KanexPro 8K HDMI 2.1 Active Optical Cable carries full 48 Gbps HDMI 2.1 over a thin OM3 fiber and copper hybrid run: 8K60, 4K120 and 4K144, HDR10, HDR10+, Dolby Vision and HLG, with eARC returning Dolby Atmos and DTS:X from the display. It is bus-powered from the HDMI source (250 mW max), plug a - [CBL-AOCUSBC-05M overview film (1:36)](https://b2b.kanexpro.com/products/cbl-aocusbc-05m): The KanexPro Adaptive USB-C 3.2 Gen2 Active Optical Cable carries DisplayPort video, USB data and PD 60W (20V/3A) charging on one thin fiber-and-copper cable. An adaptive chip picks the mode by itself: 4-lane DP 2.1 for up to 8K@60Hz or 4K@144Hz with USB 2.0, or 2-lane DP 1.4 (4K@60Hz) with 10Gbps U - [COL-HUD-21 overview film (2:34)](https://b2b.kanexpro.com/products/col-hud-21): The KanexPro COL-HUD-21 is a 2×1 huddle room switcher: a BYOD laptop on USB-C and a room computer on HDMI with a USB-B host, both on the front, to one HDMI output up to 4K60 4:4:4, by button or automatically. The USB-C input carries DisplayPort Alt Mode video, USB 3.2 Gen 1 data, 1G Ethernet and up - [COL-HUD-21D overview film (2:21)](https://b2b.kanexpro.com/products/col-hud-21d): The KanexPro COL-HUD-21D is a 2×1 dual USB-C huddle room switcher: two USB-C laptops in at the front, one HDMI output up to 4K60 4:4:4, by button or automatically. Each USB-C input carries DisplayPort Alt Mode video, USB 3.2 Gen 1 data, 1G Ethernet and charging, up to 100W for one laptop or 50W each - [COL-HUD-42 overview film (2:29)](https://b2b.kanexpro.com/products/col-hud-42): The KanexPro COL-HUD-42 is a 4×2 huddle room matrix switcher with two USB-C and two HDMI inputs on the front and two HDMI outputs, each showing its own source. Each USB-C input carries DisplayPort Alt Mode video up to 4K60 4:4:4, USB 3.2 Gen 1 data, 1G Ethernet and charging, with 100W of USB-C charg - [CR-3XCONTROL overview film (1:51)](https://b2b.kanexpro.com/products/cr-3xcontrol): The KanexPro IP-based IR, RS-232 and relay controller runs a room by itself: 32 macros chain IR, serial and relay steps with delays, and eight contact-closure trigger inputs start macros 1 to 8 on their own. It has four relays (close, open or toggle; 0–30VDC or 0–250VAC, 10A), four IR outputs with I - [EXT-4KHD150M2 overview film (2:02)](https://b2b.kanexpro.com/products/ext-4khd150m2): The KanexPro long-range HDBaseT extender kit sends one HDMI source over a single Cat5e/6 cable: 4K60 4:4:4 up to 120 m (394 ft) and 1080p up to 150 m (492 ft), at 18Gbps with HDCP 2.2, HDR10+, Dolby Vision and HLG. The transmitter has an HDMI loop out for a local monitor, the receiver a 3.5 mm analo - [EXT-50M18G overview film (1:43)](https://b2b.kanexpro.com/products/ext-50m18g): The KanexPro 4K60 HDMI extender kit carries one HDMI 2.0 source, 18 Gbps with HDR and 4:4:4 colour, over a single Cat cable, up to 50 m. The transmitter's HDMI loop-out feeds a local monitor, and one 12V supply at either end powers both units over the cable. The display's remote reaches back to the - [EXT-HD4KEARC-50M overview film (1:57)](https://b2b.kanexpro.com/products/ext-hd4kearc-50m): The KanexPro 4K60 HDMI extender kit carries one HDMI source up to 50 m (164 ft) over a single Cat6 or Cat6a cable, in 4:4:4 with HDR10, HDR10+, Dolby Vision, HLG and HDCP 2.2. On the same cable it brings the TV's sound back to the rack: over eARC into the AV receiver (Dolby Atmos, DTS:X, 7.1 PCM), o - [EXT-HD4KEARC-70M overview film (2:19)](https://b2b.kanexpro.com/products/ext-hd4kearc-70m): The KanexPro HDBaseT 3.0 extender kit carries 4K HDMI over one CAT6A/7 cable: 4K60 4:4:4 up to 40 m (131 ft), 4K30 and 1080p up to 70 m (230 ft). The TV's sound comes back over eARC or ARC to the AV receiver or soundbar at the rack. IR and RS-232 run both ways, and one 24V supply at either end power - [EXT-HD8K-150M overview film (1:52)](https://b2b.kanexpro.com/products/ext-hd8k-150m): The KanexPro 8K HDMI over HDBaseT extender kit carries an HDMI 2.1 source over one CAT6 cable: 8K30 and 4K120 at 4:4:4 up to 90 m, 4K60 up to 120 m and 1080p up to 150 m. Analog stereo audio comes out at both ends, IR and RS-232 pass through both ways, and one 24V supply at either end powers both un - [EXT-HDBT150M overview film (1:56)](https://b2b.kanexpro.com/products/ext-hdbt150m): The KanexPro HDBaseT HDMI extender kit carries 1080p at 60 Hz up to 150 m (492 ft) over a single Cat6 STP cable, and one locking 24V/1A supply at either end powers both units over that cable. The transmitter has an HDMI loop out for a local monitor, RS-232 and IR pass both ways, and Dolby Atmos, DTS - [EXT-HDBT3ARC-TX overview film (2:27)](https://b2b.kanexpro.com/products/ext-hdbt3arc-tx): The KanexPro EXT-HDBT3ARC-TX keeps the AV receiver in the rack and puts the TV up to 100 m away on one CAT6A cable: HDBaseT 3.0 sends uncompressed 4K60 4:4:4 out and brings the TV's own eARC sound back, with USB 2.0, Gigabit Ethernet, IR and RS-232 on the same cable and one 24V supply for both ends. - [EXT-HDBT70C overview film (1:51)](https://b2b.kanexpro.com/products/ext-hdbt70c): The KanexPro HDBaseT HDMI extender kit carries one HDMI source over a single Cat5e/6 cable: 1080p up to 70 m and 4K2K@30Hz 4:4:4 up to 40 m, HDCP 2.2 compliant. One 12V/1A supply at either the transmitter or the receiver powers both units over that cable, so the far end needs no outlet. Bi-direction - [EXT-HDMIKVM4K-40M overview film (2:19)](https://b2b.kanexpro.com/products/ext-hdmikvm4k-40m): The KanexPro EXT-HDMIKVM4K-40M puts the workstation in the rack and everything else on the desk: uncompressed 4K60 4:4:4 and ultrawide video up to 5120x1440, USB 3.2 at 2.5 Gbps (over five times USB 2.0, so 4K cameras, touch panels and drives work at the far end), audio and RS-232 over one CAT6a cab - [EXT-USB2100M overview film (1:50)](https://b2b.kanexpro.com/products/ext-usb2100m): The KanexPro USB 2.0 extender kit carries USB 2.0 at up to 480 Mbps up to 100 m (328 ft) over one Cat5e or Cat6 cable, with two USB-A ports at the receiver for webcams, printers, touch screens and HID devices. It is plug and play, with no drivers to install, and one 12V adapter at either end powers - [EXT-USB250M overview film (1:40)](https://b2b.kanexpro.com/products/ext-usb250m): The KanexPro USB 2.0 extender kit carries USB 2.0 at up to 480 Mbps up to 50 m (164 ft) over one Cat5e/6 cable, with two USB-A ports at the receiver, plug and play with no drivers. The transmitter is powered by the PC's USB port and the receiver by the included 5V/1A adapter; with some USB 2.0 hubs, - [EXT-USB3100M overview film (1:53)](https://b2b.kanexpro.com/products/ext-usb3100m): The KanexPro USB 3.0 HDBaseT extender kit carries USB 3.0 at up to 5 Gbps up to 100 m (328 ft) over one shielded Cat6a (F/FTP) cable, with four USB-A ports at the receiver, driver-free. One 24V supply at either end powers both units over that cable, and RS-232 and FSYNC camera sync pass through on t - [EXT-USBC-100M overview film (2:01)](https://b2b.kanexpro.com/products/ext-usbc-100m): The KanexPro USB-C extender kit carries USB 3.2 Gen 1 at up to 5 Gbps up to 100 m (328 ft) over one shielded Cat6a (F/FTP) cable, with USB-C and USB-A device ports at both ends, driver-free. One 24V supply at either end powers both units over that cable, and RS-232 and FSYNC pass through on the same - [EXT-USBC2C4K-40M overview film (1:46)](https://b2b.kanexpro.com/products/ext-usbc2c4k-40m): The KanexPro EXT-USBC2C4K-40M carries a laptop's USB-C connection to a USB-C room display up to 40m away over one CAT6a cable. The receiver's USB-C output carries DP Alt Mode video and USB 3.2 Gen 1 data on one connector, so the display's touch comes back to the laptop (tested on Windows). Video run - [EXT-USBC2XI-100M overview film (1:54)](https://b2b.kanexpro.com/products/ext-usbc2xi-100m): The KanexPro dual-host USB extender kit takes a USB-C host and a USB-B host at the transmitter, switched automatically or by its front button, and carries USB 3.2 Gen 1 at up to 5 Gbps up to 100 m (328 ft) over one shielded Cat6a (F/FTP) cable. The receiver has one USB-C and three USB-A device ports - [EXT-USBC4KFIB-10KM overview film (1:52)](https://b2b.kanexpro.com/products/ext-usbc4kfib-10km): The KanexPro USB-C over fiber extender kit takes a USB-C source with DisplayPort Alt Mode straight in, with no adapter, and carries 4K60 4:4:4 with HDCP 2.3 up to 10 km (6.2 mi) over single-mode LC fiber, or 300 m over OM4 multi-mode with SFP modules, to a USB-C display. HDR10, HDR10+, Dolby Vision, - [EXT-USBCPD2X4K-100M overview film (2:10)](https://b2b.kanexpro.com/products/ext-usbcpd2x4k-100m): The KanexPro dual-host USB-C extender kit takes two USB-C laptops up to 100 m (328 ft) over one shielded Cat6a cable, charging the selected laptop at up to 100W and driving two 4K60 HDMI displays at the far end. USB 3.2 Gen 1 at up to 5 Gbps reaches three device ports on each unit, with balanced or - [EXT-USBCPD4K-40M overview film (2:20)](https://b2b.kanexpro.com/products/ext-usbcpd4k-40m): The KanexPro EXT-USBCPD4K-40M turns one USB-C port on a laptop into a complete room connection up to 40m/130ft away over a single CAT6a cable. The receiver delivers HDMI 2.0b at up to 4K60 4:4:4 with HDCP 2.3, three USB 3.2 Gen 1 downstream ports at up to 2.5 Gbps, de-embedded analog audio and RS-23 - [EXT-USBCPD4K-70M overview film (2:47)](https://b2b.kanexpro.com/products/ext-usbcpd4k-70m): The KanexPro EXT-USBCPD4K-70M extends a USB-C laptop to a remote HDMI display over a single CAT6A/7 cable with HDBaseT 3.0: 4K60 4:4:4 up to 40 meters and 4K30 4:4:4 up to 70 meters, with USB 2.0 the whole way. The transmitter takes USB-C with DP Alt Mode v1.2a, and with a USB-C charger on its CHARG - [FLEX-MF8X10 overview film (3:13)](https://b2b.kanexpro.com/products/flex-mf8x10): The KanexPro FLEX-MF8X10 is a modular 4K60 matrix switcher in two rack units: eight HDMI sources to ten screens from one input card and one output card you choose (the chassis ships empty). It builds video walls up to 3x3 and quad view on any output, scales every output independently, and sends 4K60 - [HAECOAX overview film (1:52)](https://b2b.kanexpro.com/products/haecoax): The KanexPro HDMI audio de-embedder passes an HDMI 1.3 signal, up to 1080p60 with Deep Color (up to 6.75Gbps), through to the display and at the same time extracts its audio to Toslink optical, coaxial S/PDIF and a 3.5mm analog stereo output. It carries LPCM, Dolby Digital and DTS Digital Surround; - [HAECOAX3 overview film (1:57)](https://b2b.kanexpro.com/products/haecoax3): The KanexPro 4K HDMI audio extractor sits between an HDMI source and the display. The picture passes through at up to 4K60 4:4:4 with 10-bit HDR over 18Gbps HDMI 2.0b, HDCP 2.2, and Dolby Atmos, DTS:X, Dolby TrueHD and DTS-HD Master Audio pass on the HDMI output only. At the same time the sound goes - [HAECOAX4 overview film (1:52)](https://b2b.kanexpro.com/products/haecoax4): The KanexPro 4K HDMI audio embedder puts a separate audio source onto an HDMI signal. Video passes through at up to 4K60 4:4:4 with 10-bit HDR over 18Gbps HDMI 2.0b, HDCP 2.2. A three-position slide switch picks the audio on HDMI Out, one at a time: HDMI passes the source's own audio unchanged, incl - [HDMX42A-18G overview film (2:03)](https://b2b.kanexpro.com/products/hdmx42a-18g): The KanexPro HDMX42A-18G routes any of four HDMI sources to either of two displays at 4K60 4:4:4, scales either output from 4K to 1080p, and breaks out the audio on optical and 3.5 mm L/R, with ARC from the TV to optical. Front panel and IR remote control, an EDID switch, and a 20 mm slim case. - [KVM-2X1DUAL8K overview film (2:19)](https://b2b.kanexpro.com/products/kvm-2x1dual8k): The KanexPro KVM-2X1DUAL8K shares two monitors, a keyboard, mouse and USB 3.0 devices between two PCs. In Mode 1 both monitors follow the active PC; in Mode 2 each stays on its own PC. HDMI 2.1 with HDCP 2.3: up to 8K at 60 Hz, 4K at 120 and 144 Hz and 1080p at 240 Hz, with HDR10+ and Dolby Vision, - [KVM-2X1HDMI8K overview film (2:23)](https://b2b.kanexpro.com/products/kvm-2x1hdmi8k): The KanexPro KVM-2X1HDMI8K shares one HDMI 2.1 display, a keyboard, mouse and USB 3.0 devices between two PCs: 8K60, 4K at 120/144 Hz and 1080p at 240 Hz over 40 Gbps, with VRR, ALLM, HDR10+, Dolby Vision and zero latency. Four ways to switch: front button, keyboard hotkey, IR remote and RS-232. - [KVM-4X1MV4K overview film (2:02)](https://b2b.kanexpro.com/products/kvm-4x1mv4k): The KanexPro KVM-4X1MV4K puts four PCs on one 4K60 display and one keyboard and mouse: eight layouts from single to quad, seamless switching in single view, USB 3.0 at 5 Gbps that follows the active PC, RCA and optical audio out, and six ways to control it, from front panel and hotkeys to RS-232. - [MMX-16X16AUD overview film (2:52)](https://b2b.kanexpro.com/products/mmx-16x16aud): The KanexPro MMX-16X16AUD is an 18Gbps 16x16 HDMI 2.0b matrix: any of 16 sources to any of 16 displays at 4K60 4:4:4, with HDR10+, Dolby Vision and HLG and HDCP 2.2. Every output de-embeds its audio to coaxial outputs, and with ARC turned on a display's own audio returns to that output's coax port. - [MMX-4X4-48G overview film (2:21)](https://b2b.kanexpro.com/products/mmx-4x4-48g): The KanexPro MMX-4X4-48G is a 48 Gbps HDMI 2.1 4x4 matrix: 4K120 4:4:4 and 8K60, with VRR, ALLM, QMS, QFT and SBTM on every output, per-output downscaling and HDR conversion, and optical plus balanced audio breakout. Control from the front panel, IR, RS-232 and a web page. - [MMX-4X4AUD overview film (2:11)](https://b2b.kanexpro.com/products/mmx-4x4aud): The KanexPro MMX-4X4AUD routes any of four HDMI sources to any of four displays at 4K60 4:4:4, scales each output from 4K to 1080p on its own, and breaks out every output's audio on coax and 3.5 mm L/R, with ARC from the TV. Control from the front panel, IR, RS-232 and a web page. - [MMX-4X4CAT-150M overview film (3:06)](https://b2b.kanexpro.com/products/mmx-4x4cat-150m): The KanexPro MMX-4X4CAT-150M is an 18Gbps 4x4 HDMI 2.0b matrix with HDBaseT: any of four sources to any of four rooms, 4K60 4:4:4 to 120 m (394 ft) and 1080p to 150 m (492 ft) over CAT5e/6/7, to the four PoC receivers in the box, powered over the cable. Each output also has a mirrored HDMI port, so - [MMX-4X4CAT-70M overview film (3:35)](https://b2b.kanexpro.com/products/mmx-4x4cat-70m): The KanexPro MMX-4X4CAT-70M is an 18Gbps 4x4 HDMI 2.0b matrix with HDBaseT: any of four sources to any of four rooms, 4K60 4:4:4 to 70 m (230 ft) over one CAT6 cable, to the four PoC receivers in the box, powered over the cable. Each output also has a mirrored HDMI port, so one matrix feeds up to ei - [MMX-4X4VW overview film (2:11)](https://b2b.kanexpro.com/products/mmx-4x4vw): The KanexPro MMX-4X4VW is a 4K 4x4 seamless HDMI matrix and video wall processor in a half-rack box: any of four sources to any of four displays with no delay or picture loss, each output scaled to its display (4K30, 1920x1200, 1080p or 720p), or the four screens joined into a 2x2, 4x1, 1x4 or other - [MMX-4X4VWMV overview film (2:39)](https://b2b.kanexpro.com/products/mmx-4x4vwmv): The KanexPro MMX-4X4VWMV is a 4K60 4:4:4 seamless 4x4 HDMI 2.0 matrix, video wall and multiviewer in one rack unit: any of four sources to any of four displays with no black screen, each scaled to its display, at 18Gbps with HDCP 2.2. Video-wall mode has nine splicing modes with 0-10 bezel compensat - [MMX-8X8AUD overview film (2:57)](https://b2b.kanexpro.com/products/mmx-8x8aud): The KanexPro MMX-8X8AUD is an 18Gbps 8x8 HDMI 2.0b matrix: any of 8 sources to any of 8 displays at 4K60 4:4:4, with HDR10+, Dolby Vision and HLG and HDCP 2.2. Every output de-embeds its audio to coaxial and analog L/R outputs, and with ARC turned on a display's own audio returns to that output's co - [MMX-8X8CAT-150M overview film (3:11)](https://b2b.kanexpro.com/products/mmx-8x8cat-150m): The KanexPro MMX-8X8CAT-150M is an 18Gbps 8x8 HDMI 2.0b matrix with HDBaseT: any of eight sources to any of eight rooms, 4K60 4:4:4 to 120 m (394 ft) and 1080p to 150 m (492 ft) over CAT5e/6/7, to the eight PoC receivers in the box, powered over the cable. Each output also has a mirrored HDMI port, - [MMX-8X8CAT-70M overview film (3:33)](https://b2b.kanexpro.com/products/mmx-8x8cat-70m): The KanexPro MMX-8X8CAT-70M is an 18Gbps 8x8 HDMI 2.0b matrix with HDBaseT: any of eight sources to any of eight rooms, 4K60 4:4:4 to 70 m (230 ft) over one CAT6 cable, to the eight PoC receivers in the box, powered over the cable. Each output also has a mirrored HDMI port, so one matrix feeds up to - [SP-1X4HD150M overview film (2:34)](https://b2b.kanexpro.com/products/sp-1x4hd150m): The KanexPro SP-1X4HD150M sends one HDMI source to four displays over one CAT cable each: 4K60 4:4:4 to 120 m, 1080p to 150 m, with the four included receivers powered over the cable. An HDMI loop out feeds a local display, audio comes out on coax and a balanced block, and RS-232, bi-directional IR - [SP-HDMI1X4-18G overview film (1:43)](https://b2b.kanexpro.com/products/sp-hdmi1x4-18g): The KanexPro 4K60 1×4 HDMI distribution amplifier sends one HDMI source to four displays at once, carrying the full 18Gbps: 4K60 4:4:4 with HDR10, HDR10+, Dolby Vision and HLG, HDCP 2.3, and audio up to 7.1 with Dolby Atmos and DTS-HD Master Audio. A front-panel EDID switch sets all four outputs at - [SP-HDMI1X4A-18G overview film (2:01)](https://b2b.kanexpro.com/products/sp-hdmi1x4a-18g): The KanexPro 4K60 1x4 HDMI splitter sends one HDMI 2.0b source to four displays at 18 Gbps, 4K60 4:4:4 with HDCP 2.2, and breaks the sound out at the same time: optical S/PDIF with Dolby and DTS bitstream for a surround processor, and 3.5 mm analog stereo for an amplifier with no HDMI input. Front s - [SP-HDMI1X8-18G overview film (1:50)](https://b2b.kanexpro.com/products/sp-hdmi1x8-18g): The KanexPro 1×8 HDMI splitter sends one 4K60 source to eight displays at once, over the full 18 Gbps of HDMI 2.0 at 4:4:4 with HDCP 2.2, HDR10, HDR10+, Dolby Vision and HLG. In COPY mode each output downscales on its own, so 4K screens stay 4K while 1080p screens get 1080p; AUTO sends one format ev - [SP-HDMI2X4-8K overview film (2:09)](https://b2b.kanexpro.com/products/sp-hdmi2x4-8k): The KanexPro SP-HDMI2X4-8K picks one of two HDMI 2.1 sources and sends it to 4 screens at once at up to 8K60 (48 Gbps, 4K120, HDR10+, Dolby Vision). Every output scales for its own screen (8K to 4K or 1080p, HDR to SDR), and the audio comes out on optical and a balanced L/R block with adjustable gai - [SP-HDMI2X8-8K overview film (2:09)](https://b2b.kanexpro.com/products/sp-hdmi2x8-8k): The KanexPro SP-HDMI2X8-8K picks one of two HDMI 2.1 sources and sends it to 8 screens at once at up to 8K60 (48 Gbps, 4K120, HDR10+, Dolby Vision). Every output scales for its own screen (8K to 4K or 1080p, HDR to SDR), and the audio comes out on optical and a balanced L/R block with adjustable gai - [SP-HDPOC1X4 overview film (2:22)](https://b2b.kanexpro.com/products/sp-hdpoc1x4): The KanexPro SP-HDPOC1X4 is a compact kit that sends one HDMI source to four displays over one CAT cable each: 4K60 to 35 m, 1080p to 60 m, with the four small receivers powered over the cable. An HDMI loop out feeds a local display, audio comes out on coax and 3.5 mm, and the room's remote reaches - [SW-2X1A8K overview film (1:45)](https://b2b.kanexpro.com/products/sw-2x1a8k): The KanexPro SW-2X1A8K switches two HDMI 2.1 sources to one TV at up to 8K60 or 4K120 (40 Gbps, VRR, ALLM) and takes the audio out on optical (Dolby Digital, DTS 5.1) and a 3.5 mm jack for soundbars and amplifiers without HDMI. Auto-switching and an 8-preset EDID DIP switch. - [SW-4X1HDAUD overview film (1:52)](https://b2b.kanexpro.com/products/sw-4x1hdaud): The KanexPro SW-4X1HDAUD switches four HDMI sources to one display at 4K60 (18 Gbps, HDCP 2.2), takes the audio out on L/R and optical, brings the TV's own sound back over ARC, sets Auto, 2CH, 5.1CH or 7.1CH EDID with one button, and is controlled by RS-232 and an IR receiver port. - [SW-4X1HDUSBC overview film (1:56)](https://b2b.kanexpro.com/products/sw-4x1hdusbc): The KanexPro SW-4X1HDUSBC switches three HDMI 2.1 sources and a USB-C laptop (DP Alt Mode, up to 32 Gbps, no adapter) to one display at up to 8K60 or 4K120, with VRR and ALLM, auto-switching, an 8-preset EDID DIP switch and firmware over USB-C. - [SW-4X2PS-70M overview film (3:29)](https://b2b.kanexpro.com/products/sw-4x2ps-70m): The KanexPro SW-4X2PS-70M is a 4×2 seamless presentation switch with two USB-C and two HDMI inputs, two HDMI outputs and an included HDBaseT 3.0 receiver. Sources switch without a blackout, and multiview shows up to four on one screen in PIP, PBP, triple or quad layouts. Each USB-C input carries Dis - [SW-5X1PS-70M overview film (3:30)](https://b2b.kanexpro.com/products/sw-5x1ps-70m): The KanexPro SW-5X1PS-70M is a 5×1 seamless presentation switch with two USB-C and three HDMI inputs, one HDMI output mirrored on HDBaseT 3.0, and an included receiver. Sources switch without a blackout, by button or automatically, and multiview shows up to four on one screen in PIP, PBP, triple or - [VW-HDUSBC1X4 overview film (2:16)](https://b2b.kanexpro.com/products/vw-hdusbc1x4): The KanexPro VW-HDUSBC1X4 is a 4K60 1x4 video wall controller: one HDMI 2.0b or USB-C source (DP Alt Mode, 4K60 4:4:4 at 18Gbps with HDCP 2.2) spread across up to four HDMI displays. Eight wall layouts run from 2x2 to a 1x4 or 4x1 strip, with 0-10 bezel compensation and 180-degree rotation per outpu - [VW-MVIEW4X1 overview film (2:09)](https://b2b.kanexpro.com/products/vw-mview4x1): The KanexPro VW-MVIEW4X1 puts four 4K60 HDMI sources on one display, with seamless switching and eight layouts: single, PIP, side by side (PBP), triple and quad. It de-embeds the chosen source's audio to RCA L/R and optical, passes 18Gbps 4K60 4:4:4 with HDCP 2.2, has 19 EDID modes, and is controlle - [WP-EXTHDBTKIT overview film (1:58)](https://b2b.kanexpro.com/products/wp-exthdbtkit): The KanexPro WP-EXTHDBTKIT is a single-gang HDMI 2.0 wall plate transmitter and receiver over HDBaseT: one HDMI source at the plate reaches a display or projector up to 70 m away on one CAT5e/6 cable, 4K60 4:4:4 to 40 m and 1080p to 70 m, at 18 Gbps with HDCP 2.2, Dolby Atmos and DTS:X. Bi-direction - [WP-EXTHDTC100 overview film (1:56)](https://b2b.kanexpro.com/products/wp-exthdtc100): The KanexPro WP-EXTHDTC100 puts one USB-C cable at the table. It carries a laptop's 4K60 picture, USB 2.0 to the room's camera and speakerphone, and up to 60W of charging over one CAT6/6A run of up to 100m (328 ft). The US 2-gang wall plate has a USB-C input and an HDMI input, with automatic, manual - [WP-EXTHDTC150 overview film (2:14)](https://b2b.kanexpro.com/products/wp-exthdtc150): The KanexPro WP-EXTHDTC150 carries uncompressed 4K60 4:4:4 from a one-gang US wall plate to a display up to 120 m away (1080p to 150 m) over one CAT6/6A cable, with no AV-over-IP encoder or network switch. The plate takes an HDMI and a USB-C source, switched automatically or with its SOURCE/AUTO but - [WP-EXTHDTC70 overview film (2:15)](https://b2b.kanexpro.com/products/wp-exthdtc70): The KanexPro WP-EXTHDTC70 is a 2×1 HDMI and USB-C wall plate extender kit: the one-gang Decora plate at the table takes a USB-C or HDMI source and sends it over one CAT6/6a/7 cable to the included receiver, 4K60 4:4:4 up to 40 m and 1080p up to 70 m. Auto mode puts HDMI first, and the SOURCE button - [WP-EXTUSB3100 overview film (2:28)](https://b2b.kanexpro.com/products/wp-extusb3100): The KanexPro USB 3.2 Gen 1 wall plate extender kit puts a small receiver box with four USB device ports (one USB-C, three USB-A) where the cameras and peripherals are, up to 100 m (328 ft) from a one-gang Decora wall plate over one CAT6a F/FTP cable, at up to 5 Gbps. The plate takes a USB-B and a US - [WP-EXTUSB3100WP overview film (1:46)](https://b2b.kanexpro.com/products/wp-extusb3100wp): The KanexPro USB 3.2 Gen 1 wall plate kit puts a 1-gang Decora plate at both ends of one Cat6a (F/FTP) run: up to 5 Gbps, up to 100 m (328 ft), nothing on the table or behind the display. The front plate takes a room PC on USB-B and a laptop on USB-C and switches between them; the far plate gives a - [Video sitemap](https://kanexpro.com/item/video-sitemap.xml) ## Guides and articles - [AV guides](https://kanexpro.com/blog): how to specify HDMI and USB-C extension, matrix switching, splitters, scalers, KVM, AV over IP and Dante audio, written for integrators. - [RSS feed](https://kanexpro.com/blog/feed.xml): the twenty most recent. - [Case studies](https://kanexpro.com/casestudy): installations, with the products used. - [Solutions by sector](https://kanexpro.com/applications/broadcast): broadcast, education, enterprise, government, hospitality, worship, residential and venues. ## Support - [Support](https://kanexpro.com/support): how to reach a person, where the documents are, and the warranty. - [Knowledge base](https://kanexpro.com/support/kb): setup, configuration and fault-finding per product -- HDBaseT and CATx cabling, EDID and HDCP, Dante networks, AV-over-IP encoders and decoders, video walls and KVM. Each article names the part it is about. - [Warranty](https://kanexpro.com/warranty) and [registration](https://kanexpro.com/warranty/register): three years from purchase; a claim needs the serial number. ## Reference - [Product sitemap](https://kanexpro.com/sitemap_products.xml) - [Pages sitemap](https://kanexpro.com/sitemap_edge.xml) - [Catalog](https://kanexpro.com/catalog) - [Where to buy](https://kanexpro.com/partners) - [Warranty](https://kanexpro.com/warranty) - [Privacy Policy](https://kanexpro.com/privacy-policy) - [Terms of Use](https://kanexpro.com/terms-of-service)