VGA 1x2 Extender over CAT5e/6
Extend up to two high-resolution VGA displays over CAT5e/6 cable
The KanexPro 1x2 VGA extender over CAT5e/6 cable is designed for routing two high-resolution VGA signals and stereo audio over remote distances up to 1,000ft. (300m). Each receiver set features a separate gain and peaking rotary switch used in adjusting brightness and skew over long distances. The 15-pin HD connectors are convenient and cost-effective for all input/ output connections supporting full bandwidth compatible from VGA to WUXGA graphics card resolutions and HDTV’s to projectors. In addition, each output performs a separate buffering to maintain signal integrity and reject noise interference.
- Extend high-resolution VGA signal with audio over a single Cat5E/6 cable up to 1,000 feet (300m)
- Adjust GAIN and PEAK levels to adapt for variable lengths of UTP cable on the receiver
- Supports maximum resolutions up to WUXGA (1920x1200@60Hz)
- Stereo Audio Input through 3.5mm jack
- CAT5e/6 Output via RJ-45 Jack
- Transmitter includes Local VGA Monitor Output w/ 3.5mm jack
- EDID Compliant
- Rack or under-desk mountable
- 5VDC external power supply included
Specifications| Interface | Transmitter (1) Input: VGA x1/3.5mm Stereo x1; Output: Cat 5e/6 x2/VGA Output (Local) x1/3.5mm Stereo x1 |
|---|
| Vertical Frequency Range | 60/75/85Hz |
|---|
| Resolutions (PC) | VGA-WUXGA (1920x1200@60Hz) |
|---|
| Power Supply | 5V DC@2A, 5W |
|---|
| Operating Temperature | 0°C to +70°C |
|---|
| Operating Humidity | 10% to 85 % RH (no condensation) |
|---|
| Storage Temperature | -10°C to +80°C |
|---|
| Storage Humidity | 5% to 90 % RH (no condensation) |
|---|
| Regulatory Approvals Converter | FCC, CE, UL |
|---|
| Regulatory Approvals Power Supply | FCC, CE, UL |
|---|
| Dimensions | VGA Extender: 4”x2.6”x1” (102x66x25.5mm); Receiver: 3.25”x1.4”x0.8” (82.6x35.6x20mm) |
|---|
| Total Weight | VGA Extender: 0.47lbs (215g); Receiver: 0.25lbs (115g) |
|---|
| Warranty | 1 Year parts and labor |
|---|