NetworkAV™ 1080p HDMI over IP Receiver — 120M Add-On
KanexPro EXT-AVIP120MRX standalone HDMI over IP decoder — add display endpoints to any NetworkAV 120M system up to 394 ft over CAT5e/6 with IR control.
The EXT-AVIP120MRX adds display endpoints to any EXT-AVIP120M-based NetworkAV system — decoding full HD 1080p/60 HDMI signals from a remote encoder over IP and delivering them to a display via a single UTP CAT5e/6 cable up to 120m (394 ft). Sold separately from the kit, this standalone decoder allows integrators to scale multi-display installations without purchasing additional transmitters. The EXT-AVIP120MRX shares the same compact metal enclosure, mounting ears, IP configuration interface, and IR pass-through capabilities as the EXT-AVIP120M kit receiver — making it a direct add-on for existing deployments. Compatible with point-to-many and many-to-many topologies, it supports cascaded 10G switch configurations for large-scale display networks in signage, education, and commercial AV applications.
- Standalone HDMI over IP decoder — expands any EXT-AVIP120M system to additional display endpoints
- Decodes 1080p HDMI signals from a remote encoder over IP — up to 120m (394 ft) over single UTP CAT5e/6
- Supports point-to-many and many-to-many network configurations
- Cascadable via 10G Ethernet switches for large-scale display networks
- Wideband IR pass-through 38–56kHz for remote source control
- Embedded HTTP server for IP address configuration via web browser
- Metal enclosure with integrated mounting ears and 5V DC power supply included
Specifications| Specification | Value |
|---|
| Compression | MJPEG |
|---|
| Supported Formats | DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080p |
|---|
| Input Video Signal | 0.5–1.0V P-P |
|---|
| Input DDC Signal | 5V P-P (TTL) |
|---|
| Video Output | HDMI |
|---|
| HDCP | Compliant |
|---|
| Max Distance | 120m (394 ft) over CAT5E/6, 24AWG solid |
|---|
| Protocol | TCP/IP |
|---|
| IR Frequency | 38–56kHz |
|---|
| Default IP (RX) | 192.168.168.56 (MAC: 00:0b:78:00:60:02) |
|---|
| Supply | DC 5V/1A (included) |
|---|
| Consumption | 3W max |
|---|
| Operating Temperature | -5 to +35°C (+23 to +95°F) |
|---|
| Operating Humidity | 5–90% RH, non-condensing |
|---|
| Dimensions (L×W×H) | 4.07? × 3.68? × 0.97? (103.5 × 93.5 × 24.6mm) |
|---|
| Net Weight | 0.49 lbs (220g) |
|---|
| Regulatory | FCC Class B (Part 15) |
|---|
| 1× | Receiver |
|---|
| 1× | Power adapter DC 5V/1A |
|---|
| 1× | IR-RX cable |
|---|
| 1× | Operating instructions |
|---|
Questions
- What is the maximum transmission distance of the EXT-AVIP120MRX?
- 120m (394 ft) over a single UTP CAT5e/6 cable from a remote encoder.
- What video compression and resolutions does the EXT-AVIP120MRX decode?
- MJPEG-compressed DTV/HDTV signals at 480i, 576i, 480p, 576p, 720p, 1080i, and 1080p, output as HDCP-compliant HDMI.
- How do I add the EXT-AVIP120MRX to an existing EXT-AVIP120M system?
- Connect the EXT-AVIP120MRX to the same network as the EXT-AVIP120M encoder and assign it a unique IP address via its embedded HTTP server; all RX units on the network display the TX signal simultaneously in a one-to-many configuration.
- What is the default IP address of the EXT-AVIP120MRX?
- 192.168.168.56 (MAC 00:0b:78:00:60:02); the paired EXT-AVIP120M transmitter defaults to 192.168.168.55.
- What power does the EXT-AVIP120MRX require?
- A DC 5V/1A power adapter (included), with 3W max consumption.
- What are the dimensions and weight of the EXT-AVIP120MRX?
- 4.07 in x 3.68 in x 0.97 in (103.5 x 93.5 x 24.6 mm), weighing 0.49 lbs (220g).
- There is no video on the display connected to this receiver. What should I check?
- Verify both the TX and RX power LEDs are lit, confirm both are on the same network subnet with unique IP addresses, check that the CAT5e/6 cable follows the EIA-TIA 568B standard, and try the reset procedure on both units.
- There is a ghost image or distortion on the output. What should I check?
- Check the display's resolution settings, try a higher-quality CAT6 cable, and ensure cable length does not exceed 120m for 1080p 8-bit signals.
- What deployment types is the EXT-AVIP120MRX suited for?
- Signage, education, and commercial AV networks that need additional displays added to an existing point-to-many or many-to-many EXT-AVIP120M system.
- Does the EXT-AVIP120MRX share the same enclosure and interface as the receiver in the EXT-AVIP120M kit?
- Yes, it uses the same compact metal enclosure, mounting ears, embedded IP configuration interface, and IR pass-through capability as the receiver included in the EXT-AVIP120M kit.