| Audio Input | 2CH balanced/unbalanced analog audio (6-pin 3.5mm phoenix connector) |
|---|
| Audio Output | Dante 2CH digital audio (RJ45 PoE) |
|---|
| Sampling Rate | 44.1 / 48 / 88.2 / 96kHz @24-bit |
|---|
| Sensitivity Levels | +24dBu, +4dBu, 0dBu, 0dBV, −10dBV (per channel) |
|---|
| Max Input Level (Balanced) | +24dBu (12.28Vrms) |
|---|
| Max Input Level (Unbalanced) | +18dBu (6.15Vrms) |
|---|
| Input Impedance (Balanced) | 20kohm |
|---|
| Input Impedance (Unbalanced) | 10kohm |
|---|
| Frequency Response | 20Hz-20kHz (±0.5dB) |
|---|
| S/N Ratio | >100dB @0dBu, 1kHz (A-weighted) |
|---|
| Dynamic Range | >100dB @0dBu, 1kHz (A-weighted) |
|---|
| THD+N | <0.01% @+4dBu, 1kHz |
|---|
| Audio Delay | 1 / 2 / 5ms (configurable via Dante Controller) |
|---|
| Output Sync Delay | <10ms |
|---|
| Protocol | Dante / AES67 RTP |
|---|
| Network Bandwidth | 100Mbps |
|---|
| Transmission Distance | 328ft / 100m (CAT6/6A/7) |
|---|
| ESD Protection | IEC 61000-4-2 ±8kV air / ±4kV contact |
|---|
| Power Input | USB-C 5V/500mA or PoE IEEE 802.3af Class 0 |
|---|
| Power Consumption | 2W max |
|---|
| Dimensions | 115mm (W) x 40mm (D) x 28mm (H) |
|---|
| Weight | 94g |
|---|
| Housing | Plastic enclosure |
|---|
| Operating Temperature | 0°C - 40°C |
|---|
| Storage Temperature | −20°C - 60°C |
|---|
| Operating Humidity | 20% - 80% RH (non-condensing) |
|---|
| Storage Humidity | 10% - 90% RH (non-condensing) |
|---|
| 1x | Dante 2CH Line Input Adapter |
|---|
| 1x | 6-pin 3.5mm Phoenix Connector (male) |
|---|
| 2x | Hook & Loop |
|---|