The KanexPro WP-2XHDUSBC is a US Decora style double-gang, 3x1 Wall plate transmitter and switcher designed to switch two HDMI®2.0 inputs and one USB-C input to a remote display or a projector up to 131ft.(40m) at 4K/60 and 230ft.(70m) at 1080p/60 video and audio over single cat5e/6/7 cable. The outputs are via HDBaseT port. It supports full 18 Gbps bandwidth with true 4K video resolutions up to 4/60Hz, HDCP 2.2 compliant and will extend 4K up to 40m delivering color sampling rate of 4:4:4.
Auto Switching with Display On / Off feature
The wall plate transmitter can be easily controlled by selecting the “Source /Auto” button on the front panel. By holding the button for 3 seconds, it will go under auto switching mode and will auto-detect HDMI or USB-C inputs when connected. It also supports CEC, which can turn the DISPLAY ON/OFF right from the button on front panel for the far-end display device, and it can be programmed by IR learning or RS232 command to ensure the compatibility with various display devices. Moreover, 12V-24V PoC allows the switcher can be powered from the compatible HDBaseT receiver and regulate the power needed without adding another cumbersome power supply.
Ideal for use with court rooms, classrooms, conference rooms or showrooms where audio-visual devices can be extended from a remotely located HDMI/ USB-C source devices. The dual-gang HDMI wall plate can be used anywhere to enhance signal integrity over CAT5e/6 cabling with powerful ON/OFF display feature.