VGA 1x4 Extender over CAT5e/6 - Discontinued

Extend and distribute up to four high-resolution VGA signals over CAT5e/6 cable
MPN: VGAEXTX4  UPC: 814556013441
Extend and distribute up to four high-resolution VGA signals over CAT5e/6 cable Inquiry

Overview

Discontinued

The KanexPro 1x4 VGA extender over CAT5e/6 cable is designed for routing and distributing four high-resolution VGA signals and stereo audio over remote distances up to 1,000ft. (300m). Each receiver set features a separate gain and peaking rotary switch used in adjusting brightness and skew over long distances.

The 15-pin HD connectors are convenient and cost-effective for all input/ output connections supporting full bandwidth. Fully compatible with VGA to WUXGA graphics card resolution and HDTV’s to projectors. In addition, each output performs a separate buffering to maintain signal integrity and reject noise interference.

features

  • Extend high-resolution VGA signal with audio over a single Cat5E/6 cable up to 1,000 feet (300m)
  • Adjust GAIN and PEAK levels to adapt for variable lengths of UTP cable on the receiver
  • Supports maximum resolutions up to WUXGA (1920x1200@60Hz)
  • Stereo Audio Input through 3.5mm jack
  • CAT5e/6 Output via RJ-45 Jack
  • Transmitter includes Local VGA Monitor Output w/ 3.5mm jack
  • EDID Compliant
  • Rack or under-desk mountable
  • 5VDC external power supply included

Specs

specs

Interface:

  • Transmitter (1)
    • Input: VGA x1/3.5mm Stereo x1
    • Output: Cat 5e/6 x4/VGA Output (Local) x1/3.5mm Stereo x1
  • Receiver (4)
    • Input: Cat 5e/6 x1
    • Output: VGA x1/3.5mm Stereo x1

Vertical Frequency Range: 60/75/85Hz

Resolutions (PC): VGA-WUXGA (1920x1200@60Hz)

Power Supply:

  • Transmitter: 5V DC@2A, 10W
  • Receiver: 5V DC@2A, 5W

Operating Temperature: 0°C to +70°C

Operating Humidity: 10% to 85 % RH (no condensation)

Storage Temperature: -10°C to +80°C

Storage Humidity: 5% to 90 % RH (no condensation)

Regulatory Approvals Converter: FCC, CE, UL

Regulatory Approvals Power Supply: FCC, CE, UL

Dimensions:

  • VGA Extender Transmitter: 5.75”x2.75”x1”(146x70x25.5mm)
  • Receiver: 3.25”x1.4”x0.8” (82.6x35.6x20mm)

Total Weight:

  • VGA Extender: 0.7lbs (320g)
  • Receiver: 0.25lbs (115g)

Warranty: 1 Year parts and labor

FAQ

Name: 
Email Address:    
Ask A Question:  





Diagram

Diagram

Panel

Panel

Downloads

© 2021 KanexPro. All Rights Reserved.
 US & International: +1 (714) 332-1681

 facebook   twitter   linkedin   email