4-Output HDBaseT card for Modular matrix with 4K

Add 4-Output HDBaseT Card w/ 4K UHD to an MMX Switcher
MPN: MOD-OUT-CAT6-4K  UPC: 813982020313
Add 4-Output HDBaseT Card w/ 4K UHD to an MMX Switcher Inquiry


The KanexPro MOD-OUT-CAT6-4K is a 4K compliant, 4-output card designed to work with the HDMMX Modular matrix switchers. The twisted pair card extends each output to up to 230 feet (70m) to remote displays producing 4K UHD resolutions. It's a high-bandwidth card that supports 4Kx2K, 1080p, and 1920x1200@60Hz with the latest EDID and HDCP compliance.

The bi-directional RS232 connections for each output allow control signals at the equipment rack to control displays connected when used with the HDBASE70POER Receiver.


Ideally designed to work with the extension of long HDMI runs over cost-effective CAT5e/6 cable to remotely control source and destination devices.


  • 4-Output HDBaseT card for MMX modular matrix switchers
  • Provisions 4K UHD resolutions
  • Supported resolutions: 4Kx2K, 1920x1200, 1080p & 3D
  • Extend up to 230 feet (70m) over single CAT6 Shielded Twisted Pair
  • High bandwidth up to 10.2 Gbps
  • Built-in audio de-embedder
  • Built-in EDID management
  • Supports DVI/ HDMI signals
  • Bi-directional RS-232 control
  • Supports HDBaseT Specifications; HDMI and HDCP compliance
  • Can be used with HDBASE70POER Receiver Extender



I/O Connections
HDBaseT Port Four (4) 8P8C port (Shielded RJ45)
Audio Output Ports Four (4) 3.5mm TRS
Output Resolutions  4K@30Hz, 24Hz, 1920x1080@60, 1920x1200
RS232 Four (4) 3 pole Phoenix Connectors
Control RS232 & IR Full function pass though; RS232 port ID selectable for cascading
Supported Audio, Video and Control
Maximum Video Compatibility
at 70 m
Aluminum chassis
Maximum Video Compatibility
at 40 m
Standard Rack size, provide removable ears for mounting under table, or on wall
Video Compliance HDMI and HDCP
Embedded Audio Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
IR Carrier Frequency Range 33-55kHz at 5 volts
RS232 Baud Rate Up to 115200 baud
HDBaseT Signal Characteristics
Maximum Distance 230 feet (70 m)
Cable Requirements Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
Bandwidth 10.2Gbps
Gain 0 dB – 10 dB at 100 MHz
Resolution Range 800x600 – 1920x1200, 4Kx2K
Signal to Noise Ratio (SNR) > 70 dB at 100 MHz over 100 m
Return Loss <-30 dB at 5 KHz
Total Harmonic Distortion (THD) < 0.005% at 1 KHz
Min-Max Signal Level < 0.3 V – 1.45 Vp-p
Differential Phase Error ±10° at 135 MHz over 100 m
Chassis and Environmental
Construction Plug-in card with keyed black metal plate
Shipping Weight 0.43 kg (0.95 lbs.)
Operating Temperature 0° to +40° C (+32° to +104° F)
Operating Humidity 20% to 90%, Non-condensing
Warranty 3 years Parts & Labor
Matrix Switcher Compatibility HDMMX88-4K, HDMMX1616-4K, HDMMX3232-4K, HDMMX6464-4K
HDBaseT Transmitter (A/V and Control) Compatibility HDBASE7OPOER



Email Address:    
Ask A Question:  


© 2020 KanexPro. All Rights Reserved.
 US & International: +1 (714) 332-1681

 facebook   twitter   linkedin   email