High-resolution HDMI cables with Signal Equalizer- 100ft

High Speed HDMI cables with Ethernet plus signal equalization
MPN: HD100FTCL314  UPC: 814556012222
High Speed HDMI cables with Ethernet plus signal equalization Inquiry



Overview

The KanexPro High Speed HDMI cables with Ethernet are designed with built-in signal equalizer for applications that require high-performance transmission of HDMI digital video and multi-channel audio signals. These cables have active amplification built-in to prevent impedance mismatch, caused by the cable attenuation, dielectric losses and compensation for skin effect over long distances.

For flawless transmission, the output of the cable is placed at the end of the display to amplify full signal transmission with zero signal loss. The built-in booster does not require an external power, since it is using the 5-volt from pin 18 on the HDMI cable extracting the power from the display. These cables are fully CL3 certified which surpasses any in-wall code requirement for residential or commercial installations.

features

  • High Speed HDMI cables with Ethernet
  • CL3 Rated for In-Wall Installation
  • Built-in signal EQ
  • Supports 3D and 4Kx2K
  • Data rates up to 10.2 Gbps
  • Support color depths to 48 bits
  • HDCP compliant
  • Available in lengths of 25 feet, 50 feet, 75 feet and 100 feet
  • 24 AWG Copper Wire Construction

Specs

specs

Standards: High speed HDMI cable with Ethernet

System Management Bus (SMBus): provides control of boost, output amplitude, enable, and clock channel signal detect threshold

Data rates: Up to 10.2 Gbps

Color Depth Support: 30 bit, 36 bit and 48 bits (16 bits per color)

Vertical Frequency: Supports 60Hz & 120Hz DC-Coupled inputs and outputs

Regulatory Compliance: RoHs compliant and CL3 rated

Temperature: -40°C to +85°C operating range

Shielding & Protection:

  • Triple-layer shielding for EMI/RFI rejection
  • 24 AWG copper wire construction

Dimensions:

  • HDMI Cable Diameter: 0.37" (9.5mm)
  • HDMI Connector: 0.55" H x 0.8"W x 1.5"L

Net Weight: 7.5lbs

Warranty: Full 1-Year parts and labor

 

*NOTICE*

Side labeled "Input" should be connected to the source. Side labeled "Output" should be connected to the sink (display).

FAQ

Name: 
Email Address:    
Ask A Question:  





Downloads

© 2021 KanexPro. All Rights Reserved.
 US & International: +1 (714) 332-1681

 facebook   twitter   linkedin   email