Flexible Matrix System transceiver powered by SDVoE w/ USB, POE & RS-232

Unicast, Multicast with easy to control, video wall, PiP, & multi-view over IP
MPN: EXT-PROMATRIXUSB  UPC: 813982022423
Unicast, Multicast with easy to control, video wall, PiP, & multi-view over IP Inquiry



Overview

Next Gen Modular Matrix System

The KanexPro SDVoE powered Modular Matrix system is the most versatile flexible video distribution solution. The system is composed of transceiver devices that can be configured as either video transmitters or receivers with a simple click of a mouse. The whole system is controlled and configured by a single control module which makes setup a snap.  

Transmitters and Receivers in One Device

The KanexPro Flexible matrix transceiver (EXT-PROMATRIXUSB) is an SDVoE IP powered encoder/decoder solution. Each transceiver features with one HDMI input and output, three USB 2.0, phoenix connectors for audio in and out and a LAN (Ethernet) port with RS-232 control port. The encoders use the advanced SDVoE technology to transmit full UHD 4K/60 video from HDMI based devices with lossless video and audio with absolutely zero latency. It supports POE (power over Ethernet) when connected with a POE network switch with distances over a single CAT6a up to 330 ft. (100m) delivering one to one, one to many and many to many over the 10G Ethernet switch.

Additionally, this unit supports matrix, video wall, picture in picture (PiP) and multiviewer modes when controller (EXT-PROCTRL) is connected to the network. The controller configures settings of all connected Transmitter/Receiver units, including IP address, netmask and extender status are clearly displayed within the WebGUI. The WebGUI is easily accessed via a web browser over a normal network connection or by directly connecting an HDMI display and USB keyboard & mouse to the control unit. A trigger input interface is also provided to allow the easy addition of a remote-control keypad, or other trigger-supporting devices, which can be installed within a podium or within a table in a conference room or classroom. This interface manages stored presets with the simple press of a button. Standard control is available via WebGUI (remote or local), RS-232, Telnet, IR Remote and triggers.

Video Wall function & Multi-View

Create a NxN video wall or multi-view by adding multiple tranceivers to your application. They instantly display and have lossless video for critical video applications. They are all controlled by the central controller module and the web based GUI. 

A Central Control System for all your Switching & Controlling Needs (Sold Seperately)

The KanexPro Modular Matrix Controller (EXT-PROCTRL) is a powerful and flexible tool for controlling multiple transceivers within same network. Install this unit onto the same local network as the extenders to easily define and configure channel routing selections using the WebGUI. It is also possible to define and switch routes using customized groups or presets allowing for easy control over multiple video zones. Without the use of this controller, each individual Transmitter and Receiver pair could only be configured in a basic point-to-point operational mode. Compliant with HDCP, this controller should be combined with either of our tranceivers – EXT-PROMATRIX, EXT-PROMATRIXUSB offering a complete configurable ultra high quality video supporting resolutions up to 4K@60fps with Zero Latency. It’s a great solution for those looking to upgrade the traditional DVI/HDMI flexible matrix switchers.

Applications

Ideally used for digital signage in bars, restaurants, house of worship centers, large university campuses and in corporate AV signage, even high risk medical environments where sending high resolution, zero latency video and audio is critical.

  • Video, Audio, LAN, IR and RS-232 over Ethernet extension
  • Hotel or convention center displays
  • Multi-monitor broadcasts
  • Distributed video matrix system
  • Distributed video wall system
features

 

  • HDMI 2.0 and DVI 1.0 compatible
  • HDCP 2.2 and HDCP 1.x compliant
  • Can be configured to function as either a Transmitter or a Receiver
  • 1 HDMI input
  • 1 HDMI output (Functions as local monitor output in Transmitter Mode)
  • 1 analog stereo jack (Functions as an input in Transmitter Mode and an output in Receiver Mode)
  • 2 USB 2.0 (TypeA) ports and 1 USB 2.0 (MiniB) port
  • IP switchable with minimum latency (Requires EXT-PROCTRL)
  • Ultra-light compression, lossless for most content
  • Extension up to 100m in point-to-point mode (w/ Cat.6A cable)
  • Independent breakaway A/V matrix switching (Requires EXT-PROCTRL)
  • Video wall generation (Requires EXT-PROCTRL)
  • Multi-view compositing (Requires EXT-PROCTRL)
  • Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Genlock mode only)
  • Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI sources
  • Analog stereo audio extension, insertion and extraction (Requires EXT-PROCTRL)
  • Bidirectional LAN, IR & RS-232 extension
  • Unit can be powered directly by PoE when connected to a 10 Gigabit Ethernet (10GbE) switch that provides PoE (802.3af)
  • Signal transmission interfaces with 10-Gigabit Ethernet switches via a single Cat.6A cable
  • Basic configuration via front panel buttons with an On-Screen Display (OSD)
  • Supports the use of an external control center or control software to provide expanded functionality (Contact your authorized dealer for more information)

Specs

specs

Technical
HDMI Compliance HDMI 2.0, 1.4b
HDCP Compliance HDCP 2.0, 1.4
Video Bandwidth 18 Gbps
Ethernet Bandwidth 10 Gbps
Video Resolutions 720x400@70/85 ~ 4096x2160p@50/60Hz
Output Video Type HDMI
IR Frequency 38kHz
Baud Rate 57600 (Default), up to 115200bps
Color Space RGB, YCbCr 4:4:4, YCbCr 4:2:2
Color Depth 8-bit
HDMI Audio Formats LPCM 8CH, 32, 44.1, 48KHz
L/R Audio Formats Analog Stereo 2CH
ESD Protection Human body model +- 8kV (air-gap discharge) & +- 4kV (contact discharge)
Connections
Transceiver

Inputs:

1x HDMI Type A (19-pin female)
1x L/R Audio In (3.81mm Phoenix connector)
1x RS-232 (3.81mm Phoenix connector)

Bi-directional::

1x 10GbE LAN (RJ45 connector)

Outputs:

1x HDMI Type A (19-pin female)
1x L/R Audio Out [3.81mm Phoenix connector)
1x Debug (3.81mm Phoenix connector)

Pass-through

1x Stereo Audio
1x RS-232 (3-pin Terminal Block)
1x IR Extender
1x IR Blaster
2x USB 2.0 (Type A)
1x USB 2.0 (Mini B)
1x LAN (RJ45)

 

Mechanical
Housing Metal Enclosure, Steel
Color Black
Dimensions 215mm [W] x 116mm [D] x 25mm [H]
Weight 968g
Power Supply 12V/3A DC (Locking)
Maximum Power Consumption 24.5 watts
Operation Temperature 32 - 104°F / 0 - 40°C
Storage temperature -4 - 140°F / -20 - 60°C
Relative Humidity 20 - 90% RH (no condensation)

 

FAQ

Name: 
Email Address:    
Ask A Question:  





Downloads

© 2020 KanexPro. All Rights Reserved.
 US & International: +1 (714) 332-1681

 facebook   twitter   linkedin   email