4K/60 HDBaseT™ 4x4 Matrix Switcher

Drive the Distance with 4K UHD to 4 outputs, De-embed audio, IR & RS-232
MPN: MX-HDBASE4X4-4K  UPC: 813982020238
Inquiry



Overview

The KanexPro MX-HDBASE4X4-4K matrix switcher is a professional 4 HDMI input to 4 HDBaseT output switch with 2 HDMI mirrored outputs designed for routing 4K/60 Hz applications supporting HDCP 2.2. For proficient audio capabilities it includes 4 stereo audio and 4 digital coax outputs for de-embedding to analog audio and HDMI digital audio respectively. Audio sources can also be selected via RS232 commands. Selected audio is sent via HDMI outputs & HDBaseT outputs and the audio output sockets.

The matrix switcher also features Ethernet port for controlling via web based GUI which reduces installation time and complicated set-up as well as full control for the matrix. The HDMI inputs from the matrix can be controlled via front panel buttons, IR, RS232, or thru a web-based GUI using IP. The selected source is delivered to HDMI Output 1~2 (for HDMI input 1~2) & HDBaseT outputs 1~4 (easy extension to 70m at 1080p and 35m at 4Kx2K on a single CAT5e/6 connection with optional PoE based HDBaseT receivers) simultaneously.

Applications:

Ideally designed for higher education environments such as smart classrooms, multi-zone residential homes or commercial distribution applications, this matrix is rack-mountable and also includes international power supply.

Please note: The HDBASE70POER receivers are not included with this matrix switcher please contact our sales team on ordering these to match your application. To reduce video dropout problems from lighting, ceiling fans and other EMI issues, it is strongly recommended to use shielded CAT5e/CAT6 and use shielded RJ45 connectors with our HDBaseT products.

features

  • Ultra-fast 4x4 switching with instant display
  • Distribute four HDBaseT outputs up to 70m at 1080p
  • Up to 35m at 4Kx2K/60Hz on a single CAT5e/6 cable
  • Supports power over Ethernet (PoE) to all four receivers
  • Two HDMI mirrored outputs for local monitor support
  • Deep color support up to 16 bit
  • RGB/YCbCr 4:4:4, YCbCr: 4:2:2, 4K/60Hz
  • Illuminated buttons w/ Front panel LCD
  • Dedicated audio zones for digital and stereo audio
  • Audio De-embedding
  • Advanced EDID & HDCP 2.2 management
  • Bi-directional IR & RS-232 control
  • Ethernet connectivity 
  • Control via front panel, RS232, IR or IP
  • IR remote control included
  • Easy firmware upgrade thru Micro-USB port
  • Locking HDMI connectors
  • 19" (1U) rack-mountable steel enclosure
  • External International power supply (100V-240V AC,50/60Hz)
  • Backed by KanexPro 3 -Year full parts & labor warranty

Specs

specs

Video Input Video Output
Input 4 HDMI Output 2 HDMI
4 HDBaseT
Input
Connector
Female HDMI Output
Connector
Female HDMI
Female RJ45(with LED indicators)
Video
Signal
HDMI,DVI or DisplayPort Video
Signal
1 HDMI
1 HDBaseT
Input Level T.M.D.S. 2.9V~3.3V Output Level T.M.D.S. 2.9V~3.3V
Input Impedance 100 Ohm (Differential) Output Level Impedance 100 Ohm (Differential)
Video General
Gain 0 dB Bandwidth 10.2 Gbps
Video Signal HDMI (or DVI-D) Resolution range Up to 4Kx2K@60Hz
Transmission
Distance

1080P@60Hz =70m
4Kx2K@60Hz =40m

4Kx2K@60Hz = 8m via HDMI

Switching
Speed
200ns (Max)
EDID
Management
Built-in EDID data and manual EDID management
HDCP Supports HDCP 2.2 auto and manual HDCP management.
Audio Input Audio output
Output Signal Stereo audio
Digital audio
Output
Connector
4 3-pin
pluggable terminal blocks
4 Coax (RCA)
Stereo
Output
Earphone output: distortion 0.1% 32O/70mW@1KHz, 0.1%
16O/105mW @1KHz, support PCM
Coax
Output
Supports PCM, Dolby Digital, DTS, DTS-HD
Frequency
Response
20Hz~20KHz
Control Parts
Control /
Remote
4 IR OUT (green)
4 IR IN (black)
1 IR EYE (black)
1 TCP/IP (female RJ45)
1 RS232 (9 pin female D)
4 RS232 (3-pin pluggable terminal blocks)
Panel
Control
Front panel buttons RS232
Control
9-pin female RS232
connector
IR Built-in IR sensor
Extended IR receiver
TCP/IP
Control
Web-based GUI
General
Temperature -10 ~ +40C Reference
Humidity
10% ~ 90%
Power
Supply
DC 24V 2.5A Power
Consumption
48W (Max)
Dimension
(W*H*D)
437 x 44 x 235 mm
(1U high, full rack wide)
Product
Weight
2.0Kg

Optional Receiver part # HDBASE70POER

FAQ

Name: 
Email Address:    
Ask A Question:  

   =   



Diagram

Diagram

Panel

Panel

Downloads

© 2017 KanexPro. All Rights Reserved. facebook   twitter   linkedin   email