Q: Does the converter experience lag of any sort when converting the video? I would like to use it for video game consoles and my computer to play games on a television that only supports 480p and 1080i YPbPr component input. Thus, for playing games, there can't be any lag from the device or else the games I play would be virtually unplayable.
A: No lags as far as any game consoles are concerned,however, when a PC is used for playing games, there are a number of things to reason : refresh rate, resolution, graphics card support for digital to analog resolutions which may have some slight effect, otherwise these converters are robust and reliable.
Q: When connecting a device through this, does the converter simply keep the same resolution? For example, say I'm putting a 1080i signal through it. Would a 1080i signal come out? Also, would there be any degradation to the original picture due to processing, or does the device simply act as a pass through?
A: Yes, that is correct, it will not scale the output to 1080i since its not a scaler,its a pass through device that does the conversion from digital HDMI to Component.It will support the best resolution available when converted to component which is 1080p and not 1080i.
Q: Connecting the KanexPro to Mitsubishi WS-65413 doesn't send a signal. What is the trick to sending the signal?
A: Change the resolution on your source device to match Mitsubishi tv, for example to 720p HD, or 1080i.
Q: Do i have to use the R/L audio? My source has digital audio as output. Could I just use the component out and digital audion with this or is my audio going to be out of sync?
A: Yes, you can use the digital from your amp, the R+L is just designed for stereo audio hook up.
Q: Will it work with XBOX One HDMI output into a projector that only has red, blue and green component inputs with the audio red and white going to an amplifier?
A: Yes, it works.
Q: I have a pioneer rear projection tv pro-710 hd will work for this? Want to connect an Apple TV to our rear projection tv
A: Yes, but please change the resolution on your apple TV to 720p HD before plugging the converter to your TV.
Q: I have a ps4 and the converter but when I plug it all in to my samsung dlp tv it says "not supported mode" is there a setting that I need to change on the ps4 to make this work?
A: Yes, please change the video resolution on your PS4 to either 1080i or 720p to watch.
Q: i am recieving audio output but not any video. i switched the video output to 780p. what else can i do to fix it?
A: Try adjusting the resolution to HD720p or HD1080i on your source device by connecting using an HDMI cable to the TV and then use our converter.
Q: Bought the HDMI to Component with Audio Converter and have blue, green, red cables with yellow and white cables and this converter has 2 red ports. Should the yellow go in extra red or not go in at all?
A: Yellow cable is not needed on the RGB ony Red, green and Blue, plus red and white for audio.
Q: Will this work with Hulu programming in Roku? Thanks
A: Yes, just adjust the resolution on your Roku device to either 720p or 1080i depending on your tv.