HDBaseT™ Long-Runner 100M

Extend HDMI up to 100 meters with Uncompressed HD 1080p /3D, Digital Audio & IR over a single Cat 6 cable
MPN: HDBASE100M
HDBASE100M Inquiry

+ Zoom In

Overview

The KanexPro Long-Runner employs HDBaseT technology to route high-resolution HDMI signals from the source up to 330 feet (100m) to your HD display. It supports full 3D with resolutions up to 4Kx2K (4 times the 1080p), multi-channel audio and IR extension over a single low cost CAT5e/6 cable.

Fully compliant with HDCP, EDID and CEC controls, the Long-runner HDMI extender is an ideal solution for HDMI extension over long distances.

Please note:

Do not use couplers in to join RJ-45/CAT6 cables, this will cause signal degradation and signal loss. To reduce video dropout problems from lightings, ceiling fans and other EMI issues, it is strongly recommended that you terminate shielded CAT5e/CAT6 and use shielded RJ45 connectors with our extender products. "EZ end" connectors are not recommended for use with HDMI extenders.

features

  • Extend HDMI signals up to 330 ft. (100m) on single CAT6 cable
  • Infrared Signal Input/Output, embedded over extension
  • Supports resolutions from 1080p/60@48bit to 4Kx2K
  • Supports data rates up to 10.2 Gbps
  • Enables 3D pass-through
  • Supports CEC pass-through
  • HDCP and EDID compliant
  • Audio support: Dolby TrueHD & DTS Master Audio, 7.1 compliant
  • Uncompressed audio support such as LPCM
  • Front panel-LEDs for link activity and HDCP authentication
  • External power supplies included

Note: Please adhere to the TIA/EIA568B standards when terminating network cables in the field.

Specs

specs

Interface:

  • Transmitter:
    • Input: HDMI
    • Output: HDBaseT (Cat 5e/6)
  • Receiver:
    • Input: HDBaseT (Cat 5e/6)
    • Output: HDMI

Video Amplifier Bandwidth: 6.75Gbps / 2.25Gbps per channel

Vertical Frequency Range: 50/60Hz

Resolutions (HDTV): 480i, 576i, 480p, 576p, 720p, 1080i, 1080p

Computer Resolution: WUXGA (1920x1200)

Power: 5V DC@2A

Power Consumption: 5W (Maximum)

Regulatory Approvals Converter: FCC, CE, UL

Regulatory Approvals Power Supply: FCC, CE, UL

Dimensions: 3.93”x2.5”xZ1.0” (100x65x25.5mm)

Weight: 0.37 lbs. (170g)

Warranty: 1 Year limited

Helpful Tips & Recommendations:

  • CAT-5 cables should not exceed 330 feet or (100m).
  • Please adhere to the TIA/EIA568B standards when terminating network cables in the field.
  • Shielded CAT5/6 with metal RJ-45 connectors are recommended to safeguard against random video flashes caused by electromagnetic interference (EMI).
  • Do not use crossover cables, patch cables or Ethernet couplers to extend two CAT5 cables. This may damage the Tx & Rx.
  • If the power LED indicator on the Tx/Rx unit is not on, check to make sure that the CAT5 cables are not crossed i.e., Ethernet to Link instead of Ethernet to Ethernet.

FAQ

Name: 
Email Address:    
Ask A Question:  

   =   



Q: What kind of latency is there with this product? If video is run through this extender but not the audio will they appear out of sync?
A: Zero latency, HDMI and digital audio syncs at the same time, when used with appropriate distance up to 100 meters and with shielded cat5e cable.


Diagram

Diagram