4K HDMI Cable Controller

HD Cable Clicker Designed for Single-Click to Display
MPN: 4K-HDCLICKER  UPC: 813982020610
Inquiry



Overview

The KanexPro 4K-HDCLICKER is an HDMI based cable controller designed to click and show the content from your laptop. It also acts as a fast-switch to toggle HDMI source devices such as laptops, tablets and other smart devices enabling you to display the content instantly by a click of a button. Just single “Click-to-show me" button to selection switch any source to display under single window layout or single Click-to-show me button to step in or step out any source under multiple window layouts. Press & hold the Click-to-show me button to select switch any source to full-screen display under multiple window layouts.

Zero Configuration required

There is absolutely no set up or configurations required in order to use this cable clicker. No Wi-Fi connectivity or Internet needed since its wired using existing HDMI/ DisplayPort cabling.

HDMI Locking interface

The 4K-HDCLICKER comes with a cable lock screw hole and two tiny screws to tightly lock and fasten the cable firmly, which are then connected to the HDMI devices being, used to Click-to-show me. This will prevent from accidental cable jostle or cable pull while connected in the conference room.

Stress-free Integration

The 4K-HDCLICKER can be easily integrated with floor, table or wall cable connection boxes by purely connecting existing HDMI or DisplayPort wiring to HDBT-VTSC72-4K or HD-SC71D-4K Presentation Systems in conference room or corporate executive boardrooms to ensure the team can visually focus on the work at hand and elevate the role of content sharing to one 4K Display. And it seamlessly works with any Video conferencing systems such as Polycom, Cisco, and Avaya.

features

  • Pre-configured HDMI dongle for connecting one-end to a Laptop/PC
  • Supports Click-to-show me function to display content on to the display
  • Supports HDMI 1.4 revision up to 4K@30Hz for input & loop out
  • Supports 1080p, 1920x1200 WUXGA resolutions
  • Available in HDMI and DisplayPort interconnects
  • Press & Hold “to select entire display
  • Lets you connect the other end to the input of the Presentation Scaler Switcher
  • Zero configuration and does not require Wi-Fi or internet
  • Lockable HDMI controller – to prevent signal loss or cable jostle
  • Enables multiple functions to see in/out of the display 

Specs

specs

Supported Formats
Video Input Formats 1x  HDMI
Format Compliance HDMI 2.0 spec
Video Output Formats 1x  HDMI
Audio Input Formats HDMI: embedded digital audio
Audio Output Formats HDMI: embedded digital audio
Audio Bypass HDMI2.0 audio
CEC No
ARC No
Inputs Connectors
HDMI / DVI Input 1x HDMI 19-pin female connectors
Outputs Connectors
HDMI Output 1x HDMI 19-pin female connector
Control
Electronics Control proprietary control signal embedded in HDMI
Mechanical
Dimensions (W x H x D) 1.9” x 0.39“ x 0.826” (49mm x 10mm x 21mm)
Weight 0.04 lbs. (20g)
Construction 1~2mm aluminum alloy with matte black finish
Environmental
Operating Temperature +32° to +104° F (0° to +40° C)
Storage Temperature -4° to +140° F (-20° to +60° C)
Humidity (Storage / Operating) 20% to 90% (non-condensing)
Power
AC Power HDMI Internal 10mA
Power Consumption 0.05W (max.)
Accessories Included
2x Screws for cable lock,
x Screw Driver in pack set
 

 

FAQ

Name: 
Email Address:    
Ask A Question:  

   =   



Downloads

© 2017 KanexPro. All Rights Reserved. facebook   twitter   linkedin   email